Now you will have the opportunity to pass the Cisco 300-615 (DCIT) exam using our just-updated 300-615 exam dumps, which have proven to be a great 300-615 online resource for studying for the 300-615 exam.
Pass4itSure valid 300-615 exam dumps are very powerful learning material. If you wish, go to the latest 300-615 exam dumps page https://www.pass4itsure.com/300-615.html Get access to 179 great exam question and answer questions to help you successfully pass the exam.
Specific information about the 300-615 DCIT exam:
The 300-615 DCIT is the Troubleshooting Cisco Data Center Infrastructure exam. It is associated with CCNP Data Center and Cisco Certified Professional – Data Center Operations certifications.
The cost of the Cisco 300-615 exam is $299. This exam is a proctored exam, where you need to answer 60-70 questions in 90 minutes and get 80% of your score to pass.
How to prepare for the 300-615 DCIT exam?
Good online learning resources are essential to prepare for the 300-615 exam, and here is exactly one that meets the criteria – Pass4itSure 300-615 exam dumps.
Using Pass4itSure 300-615 exam dumps is a great way to prepare for the 300-615 exam.
With online learning resources, what can I do to pass the 300-615 exam?
Make use of the learning resources (quiz questions) in the latest 300-615 exam dumps to study the questions and answers and become familiar with it, and you will be able to pass the 300-615 DCIT exam.
What are some useful learning resources to learn from? 300-615 exam
- Troubleshooting Cisco Data Center Infrastructure (DCIT)
- Pass4itSure 300-615 exam dumps
Where can I find valid 300-615 exam questions?
Here, offered. Below you will find free 300-615 exam questions.
New Cisco 300-615 DCIT Exam Dumps & Questions Test 2022 [Free]
Q1 – New
Refer to an exhibit. An engineer is troubleshooting an upgrade failure on a switch. Which action resolves the issue?
A. Save the system image in NVRAM.
B. Use the same system image as the kickstart image.
C. Load a new system image.
D. Reload the same system image.
Correct Answer: C
Q2 – New
Refer to the exhibit. An engineer is experiencing a problem when running a Docker container inside the Cisco Nexus 9000 bash shell. Which action resolves the issue?
A. Add a new nameserver
B. Connect to bash as a different user
C. Change VRF to management
D. Configure the mgmt0 interface
Correct Answer: B
Q3 – New
Refer to the exhibit. When an engineer inserts 8-Gb FC SFP port 15 on a Cisco UCS Fabric Interconnect, the port fails. What is a possible cause of the issue?
A. Port 15 is configured as an Ethernet port.
B. Port 15 is configured for 4 Gb FC.
C. Port 15 is missing a license.
D. The polarity of the fiber cable is reversed.
Correct Answer: B
Q4 – New
You plan to use OSPFv2 on several Cisco Nexus 9000 Series Switches. Which setting must match the neighboring switches to establish adjacency?
A. the LSA arrival time
B. the dead interval
C. the last flood scan time
D. the retransmit interval
Correct Answer: B
Q5 – New
Refer to the exhibit.
The EEM script is applied in the default VDC to collect the outputs during high CPU utilization on the Cisco Nexus 7000 Series Switch for all VDCs. Which configuration setting must be added to the script to fix the issue?
A. switch(config-apple)# event SNMP 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op get entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
B. switch(config-apple)# event SNMP oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-Val 50 poll interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(configapple)# action 0.8 cli switchto vdc Distribution
C. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 pollinterval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(configapple)# action 0.8 cli switchto vdc Distribution
D. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
Correct Answer: B
Need an exact snapshot to confirm the following.
The selection is due to the SNMP command having the key word “old”.
The command “switch to VDC Core” show run in “enable” mode, not “config t” mode.
Q6 – New
A network administrator attempts to install an application in the Cisco NX-OS Guest shell and receives an error that there is not enough space on the disk. Which command must the administrator run to increase the disk space available in the Guest shell?
A. guest shell grow disk rootfs [size-in-MB]
B. guest shell overextend rootfs [size-in-MB]
C. guest shell resize rootfs [size-in-MB]
D. guestshell resize2fs rootfs [size-in-MB]
Correct Answer: C
Q7 – New
One of the Cisco Nexus Series interfaces has become disabled with the error message “DCX-No ACK in 100 PDUs”. What is the cause of this error?
A. The host has not responded to the Control Sub-TLV DCBX exchanges of the switch.
B. The acknowledgment number in the server response has not incremented for 100 exchanges.
C. Cisco Discovery Protocol is disabled on the switch.
D. LLDP is disabled on the switch.
Correct Answer: B
Q8 – New
An engineer must configure Linux hosts that are deployed on Cisco UCS B-Series Servers to boot from SAN. The SAN boot policy is configured in Cisco UCS Manager, and the boot order is verified to be set as expected However, the Linux hosts fail to boot. Which action resolves the issue?
A. Remove all of the local storage that is installed
B. Delete and reconfigure the pWWN of the SAN boot target
C. Remove all of the ISO images that are mounted as a virtual CD-ROM
D. Delete and reconfigure the boot LUN
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/b_UCSM_CLI_Configuration_Guide_2_2/configuring_server_boot.pdf page 5
Q9 – New
Refer to the exhibit. The connection between a Cisco Nexus 5548UP switch and a Cisco MDS switch fails to initialize. What is the cause of the issue?
A. VSAN 1 is suspended.
B. The SFP is unsupported.
C. Trunk mode must be activated.
D. The interface is in an incorrect mode.
Correct Answer: C
Q10 – New
An engineer is troubleshooting a fabric discovery failure. Which two requirements must an engineer verify about switch connectivity to solve the problem? (Choose two.)
A. A Cisco APIC must be attached to a spine node only.
B. A Cisco APIC must be attached to leaf nodes.
C. Spine nodes must connect to other spine nodes.
D. A Cisco APIC must be dual-attached to two separate spine nodes.
E. Leaf nodes must connect to spine nodes only.
Correct Answer: BE
Q11 – New
An engineer troubleshoots a VXLAN EVPN data center. The applications in the data center fail to reach the DNS server that is located at IP 10.10.10.10. The engineer examines the BGP EVPN routing table and notes that the IP prefix route that covers the DNS server is missing. Which action resolves the issue?
A. Set the IP prefix route to represent [5]:[0]:[0]:[32]:[10.10.10.10]/224 in the routing table.
B. Configure an IP ARP entry to represent [2]:[0]:[0]:[48]:[0050.569f.1285]:[32]:[10.10.10.10]/272 in the routing table
C. Set the IP prefix route to represent [2]:[0]:[0]:[48]:[0050.569f.1285]:[0]:[0.0.0.0]/216 in the routing table
D. Configure an IP ARP entry to represent [4]:[0300.0000.00fc.bd00.0309l[32]:[10.10.10.10]/136,n the routing table
Correct Answer: A
Q12 – New
Refer to the exhibit.
An upgrade operation fails with an error displayed. Which action resolves the issue?
A. Use a different system image
B. Use a different kickstart image
C. Allocate extra space on a flash drive to extract a kickstart image
D. Allocate extra space on a flash drive to extract a system image
Correct Answer: A
Kickstart image verification succeeded. The system image has failed.
Q13 – New
A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?
A. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels 2) Verify that at least two physical cables between the IOM and fabric interconnect function properly. 3) Check for runtime link-down status 4) Reseat the affected IOM.
B. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level. 2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly. 3) Check for runtime link down status 4) Reseat the affected IOM.
C. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level. 2) Verify that at least two physical cables between the IOM and fabric interconnect function properly. 3) Check for runtime link down status. 4) Reseat the affected IOM.
D. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels. 2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly. 3) Check for runtime link down status. 4) Reseat the affected IOM.
Correct Answer: B
Also prepared for you:
Cisco 300-615 dumps pdf free download: https://drive.google.com/file/d/1_rQoK4XHO1fWFQmLaB8UZjR8dJ1nc9KR/view?usp=share_link
Pass4itSure has updated the 300-615 exam dumps so you can safely use it to prepare for the Cisco 300-615 exam. Download the latest 300-615 exam dumps https://www.pass4itsure.com/300-615.html get all exam questions.
