Category: CCNA
New Updated Cisco 640-816 Offer New Cisco 640-816 Free Dumps With PDF And VCE Download Free Study Guide
Ensure that you are provided with only the best and most updated Cisco 640-816 Certification training materials, we also want you to be able to access Cisco 640-816 easily, whenever you want.We provide all our Cisco 640-816 Certification exam training material in PDF format, which is a very common format found in all computers and gadgets. Now we add the latest Cisco 640-816 content and to print and share content.
Exam A
QUESTION 1
A department decides to replace its hub with a Catalyst 2950 switch that is no longer needed by another department. To prepare the switch for installation, the network administrator has erased the startup configuration and reloaded the switch. However, PCs that are connected to the switch experience various connectivity problems. What is a possible cause of the problem?
A. The VLAN database was not erased.
B. The management VLAN is disabled.
C. The running configuration should have been erased.
D. The “mode” button was not pressed when the switch was reloaded.
E. The switch was not configured with an IP address or a default gateway.
Correct Answer: A
QUESTION 2
Which two of these statements regarding RSTP are correct? (Choose two.)
A. RSTP cannot operate with PVST+.
B. RSTP defines new port roles.
C. RSTP defines no new port states.
D. RSTP is a proprietary implementation of IEEE 802.1D STP.
E. RSTP is compatible with the original IEEE 802.1D STP.
Correct Answer: BE
QUESTION 3
A network administrator needs to configure port security on a switch. Which two statements are true? (Choose two.)
A. The network administrator can apply port security to dynamic access ports.
B. The network administrator can apply port security to EtherChannels.
C. When dynamic MAC address learning is enabled on an interface, the switch can learn new addresses, up to the maximum defined.
D. The sticky learning feature allows the addition of dynamically learned addresses to the running configuration.
E. The network administrator can configure static secure or sticky secure MAC addresses in the voice VLAN.
Correct Answer: CD
QUESTION 4
What are two characteristics of a switch that is configured as a VTP client? (Choose two.)
A. If a switch that is configured to operate in client mode cannot access a VTP server, then the switch reverts to transparent mode.
New Version Professional Cisco 640-802 Exam Questions Free Download
CCNA Exam Certification Guide is a best-of-breed Cisco 640-802 exam study guide that has been completely updated to focus specifically on the objectives.Senior instructor and best-selling author Wendell Odom shares preparation hints and Cisco 640-802 tips to help you identify areas of weakness and improve both your conceptual and hands-on knowledge.Cisco 640-802 Material is presented in a concise manner, focusing on increasing your understanding and retention of exam topics.
Exam A
QUESTION 1
Refer to the exhibit. What could be possible causes for the “Serial0/0 is down” interface status? (Choose two.)
A. A Layer 1 problem exists.
B. The bandwidth is set too low.
C. A protocol mismatch exists.
D. An incorrect cable is being used.
E. There is an incorrect IP address on the Serial 0/0 interface.
Correct Answer: AD
QUESTION 2
Before installing a new, upgraded version of the IOS, what should be checked on the router, and which command should be used to gather this information? (Choose two.)
A. the amount of available ROM
B. the amount of available flash and RAM memory
C. the version of the bootstrap software present on the router
D. show version
E. show processes
F. show running-config
Correct Answer: BD
QUESTION 3
Refer to the exhibit. Which two statements are true about interVLAN routing in the topology that is shown in the exhibit? (Choose two.)
A. Host E and host F use the same IP gateway address.
B. Router1 and Switch2 should be connected via a crossover cable.
C. Router1 will not play a role in communications between host A and host D.
D. The FastEthernet 0/0 interface on Router1 must be configured with subinterfaces.
E. Router1 needs more LAN interfaces to accommodate the VLANs that are shown in the exhibit.
F. The FastEthernet 0/0 interface on Router1 and Switch2 trunk ports must be configured using the same encapsulation type.
» Read more about: New Version Professional Cisco 640-802 Exam Questions Free Download »
Ensure Pass Cisco 640-801 Shares Latest Cisco 640-801 New Questions for Cisco 640-801 Exam 100% Valid Download
Preparing Cisco 640-801 exam is not difficult now. You can prepare from Cisco 640-801 Certification or Cisco 640-801 dumps. Here we have mentioned some sample questions. You can use our free 640-760 study material notes for test preparation. Latest Cisco 640-801 pass4sure study material available.
Exam A
QUESTION 1
Which of the following devices can an administrator use to segment their LAN? (Choose all that apply)
A. Hubs
B. Repeaters
C. Switches
D. Bridges
E. Routers
F. Media Converters
G. All of the above
Correct Answer: CDE
QUESTION 2
Routers perform which of the following functions? (Select three)
A. Packet switching
B. Collision prevention on a LAN segment.
C. Packet filtering
D. Broadcast domain enlargement
E. Broadcast forwarding
F. Internetwork communication
Correct Answer: ACF
QUESTION 3
Within the Certkiller office, The Sales and Production networks are separated by a router as shown in the diagram below:
Which of the following statements most accurately describes the characteristics of the above networks broadcast and collision domains? (Select the two best answer choices)
A. There are two broadcast domains in the network.
B. There are four broadcast domains in the network.
C. There are six broadcast domains in the network.
D. There are four collision domains in the network.
E. There are five collision domains in the network.
F. There are seven collision domains in the network.
Correct Answer: AF
QUESTION 4
The Certkiller corporate LAN consists of one large flat network. You decide to segment this LAN into two separate networks with a router. What will be the affect of this change?
A. The number of broadcast domains will be decreased.
B. It will make the broadcasting of traffic between domains more efficient between segments.
Buy Latest Cisco 640-801 PDF Download,Cisco 640-801 PDF and Vce Questions For Groundbreaking Results
The Cisco 640-801 Questions & Answers covers all the knowledge points of the real exam. We update our product frequently so our customer can always have the latest version of Cisco 640-801. We provide our customers with the excellent 7×24 hours customer service. We have the most professional Cisco 640-801 expert team to back up our grate quality products. If you still cannot make your decision on purchasing our product, please try our Cisco 640-801 free pdf
Exam A
QUESTION 1
If an ethernet port on a router was assigned an IP address of 172.16.112.1/20, what is the maximum number of hosts allowed on this subnet?
A. 1024
B. 2046
C. 4094
D. 4096
E. 8190
Correct Answer: C
QUESTION 2
An access list was written with the four statements shown in the graphic. Which single access list statement will combine all four of these statements into a single statement that will have exactly the same effect?
A. access-list 10 permit 172.29.16.0 0.0.0.255
B. access-list 10 permit 172.29.16.0 0.0.1.255
C. access-list 10 permit 172.29.16.0 0.0.3.255
D. access-list 10 permit 172.29.16.0 0.0.15.255
E. access-list 10 permit 172.29.0.0 0.0.255.255
Correct Answer: C
QUESTION 3
Refer to the exhibit. What is the most efficient summarization that R1 can use to advertise its networks to R2?
A. 172.1.0.0/22
B. 172.1.0.0/21
C. 172.1.4.0/22
D. 172.1.4.0/24172.1.5.0/24172.1.6.0/24172.1.7.0/24
E. 172.1.4.0/25172.1.4.128/25172.1.5.0/24172.1.6.0/24172.1.7.0/24
Correct Answer: C QUESTION 4
Which routing protocols can be used within the enterprise network shown in the diagram? (Choose three.)
A. RIP v1
B. RIP v2
C. IGRP
D. OSPF
E. BGP
F. EIGRP
Correct Answer: BDF
QUESTION 5
Refer to the exhibit. The network shown in the exhibit has just been installed. Host B can access the Internet, but it is unable to ping host C. What is the problem with thisconfiguration?
