Category: Cisco
Cisco 642-503 Brain Dumps, Money Back Guarantee Cisco 642-503 Demo Download 100% Pass With A High Score
Flydumps offers the first-hand Cisco 642-503 exam real questions and answers, by train the latest Cisco 642-503 PDF and VCE dumps,you will well prepare for the Cisco 642-503 exam. Visit Flydumps.com to get free new version for training.
QUESTION 46
Please study the exhibit carefully.
When you configure DHCP snooping, which ports should be configured as trusted ?
A. port E only
B. port A only
C. ports B and C
D. ports A, B, C, and E
E. ports A, B, and C
F. ports B, C, and E
Correct Answer: E Section: (none) Explanation
Explanation/Reference:
Explanation: Understanding DHCP Snooping and Mitigating DHCP Attacks DHCP snooping is a switch feature that determines which switch ports can respond to DHCP requests. To accomplish this configuration, you must configure a port as either trusted or untrusted. Untrusted ports can source requests only, whereas trusted ports can source DHCP replies. This will help you prevent the attack by controlling where the DHCP server is and the path that you expect DHCP replies to come from. Reference: CCSP SNRS Quick Reference Sheets
QUESTION 47
Refer to the DMVPN topology diagram in the exhibit. Which two statements are correct? (Choose two.)
A. The hub router Certkiller 1 needs to have EIGRP split horizon disabled.
B. At the Certkiller 4 router, the next hop to reach the 192.168.0.0/24 network is 172.17.0.1.
C. The spoke routers Certkiller 2 and Certkiller 4 act as the NHRP servers for resolving the remote spoke physical interface IP address.
D. At the Certkiller 2, the next hop to reach the 192.168.1.0/24 network is 172.17.0.1.
E. Before a spoke-to-spoke tunnel can be built, the spoke router needs to send an NHRP query to the hub to resolve the remote spoke router physical interface IP address.
F. At the Certkiller 4, the next hop to reach the 192.168.2.0/24 network is 10.0.0.1.
Correct Answer: AE Section: (none)
Explanation
Explanation/Reference:
Explanation: For spoke-to-spoke DMVPN networks, a unique challenge exists because the spokes cannot directly exchange information with one another, even though they are on the same logical subnet. This means that the hub router needs to advertise subnets from the other spokes on the same subnet. The IP routing rule known as split horizon prevents the hub from doing this: SNRS_ROUTER(config-router)#interface tunnel 0 SNRS_ROUTER(config-if)#no ip split-horizon eigrp 1 Reference: CCSP SNRS Quick Reference Sheets NHRP-A client and server protocol where the hub is the server and the spokes are the clients. The hub maintains an NHRP database of the public interface addresses of the each spoke. Each spoke registers its real address when it boots and queries the NHRP database for real addresses of the destination spokes in order to build direct tunnels. Reference: Cisco IOS Security Configuration Guide, Release 12.4
QUESTION 48
What does thiscommand do?
Cisco 642-502 Certification Braindumps, Best Cisco 642-502 Study Guide Book For Download
Where To Download New Free Cisco 642-502 VCE Exam Dumps? As we all know that new Cisco 642-502 exam are difficult to pass, but if you get the valid Cisco 642-502 exam questions, you will pass the Cisco 642-502 exam easily. Nowdays, Flydumps has published the newest Cisco 642-502 exam dumps with free vce test software and pdf dumps, by training the Flydumps Cisco 642-502 questions, you will pass the exam easily!
QUESTION 45
Which ESP mode is used to provide end-to-end protection of message payloads between two hosts?
A. transport mode
B. encrypted mode
C. ESP mode
D. tunnel mode
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 46
Which three statements about Cisco Secure ACS are true? (Choose three.)
A. NAS can access multiple Cisco Secure ACS for Windows servers.
B. Cisco Secure ACS for Windows servers can only log onto external servers.
C. The Cisco Secure ACS for Windows server supports only TACACS+.
D. Database replication is supported by the Cisco Secure ACS for Windows servers.
E. The service used for authentication and authorization on a Cisco Secure ACS for Windows server is called CSAdmin.
F. The Cisco Secure ACS for Windows servers uses the CSDBsynch service to manage the user and group accounts.
Correct Answer: ADF Section: (none) Explanation
Explanation/Reference:
QUESTION 47
After configuring multiple transform sets, where do you specify the transform sets?
A. ACL
B. ISAKMP policy
C. router interface
D. crypto map entry
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 48
Simulate question
This is the correct configuration:
Switch(config)#interface fastEthernet 0/12
Switch(config-if)#switchport port-security maximum 1 Switch(config)#copy run start
A.
Adobe 9A0-803 Try Free Demo,High Success Rate Adobe 9A0-803 Study Guides UP To 50% Off
Flydumps guarantee your Adobe 9A0-803 exam success with our Exam Resources.Our Adobe 9A0-803 Flydumps are the latest and developed by experience’s IT certification Professionals working in today’s prospering companies and data centers.All our Adobe 9A0-803 Flydumps including Adobe 9A0-803 exam questions which guarantee you can 100% success Adobe 9A0-803 exam in your first try exam.
QUESTION 11
What method is used to open linked documents within Dreamweaver on a local hard drive?
A. Double-click the link.
B. Select the link and select Modify > Open Linked Page.
C. Select the link and select File > Open Linked Page.
D. Press Ctrl (cmd-click Mac) and single-click the link.
Correct Answer: B
QUESTION 12
What is the target attribute of the link (<a>) tag used to specify? (Choose TWO)
A. name of the file that is being linked to
B. name of the anchor that is being linked to
C. frame in which a linked page should open
D. whether a linked page should open in a new browser window
E. text/image that is to appear as a hypertext link
Correct Answer: CD
QUESTION 13
Dreamweaver can display code that is inserted by the server using a server-side include. Why should a developer use this feature?
A. way to create a server-side include in HTML
B. makes sure the code is accessible
C. helps test how the server-side include works on a local machine
D. aids proper layout of the web page
Correct Answer: D
QUESTION 14
What properties can be set ONLY when a table cell is selected? (Choose TWO)
A. Border Width
B. Horizontal Alignment
C. Cell Padding
D. Vertical Alignment
E. Cell Spacing
Correct Answer: BD
QUESTION 15
How can changes to a template be applied to all attached pages?
A. Modify > Templates > Apply Template to Pages
B. Right-click (CTRL-click Mac) in an editable region and choose Template > Update Editable Regions
C. Modify > Templates > Update Pages
D. File > Save as Template
Correct Answer: C
QUESTION 16
A change is made and saved to a style in a linked CSS file. What must be done so that the HTML pages using the CSS show the change?
Adobe 9A0-060 Certification,Easily To Pass Adobe 9A0-060 Practice Exam With New Discount
Nowdays,Flydumps has published the newest Adobe 9A0-060 exam dumps with free vce test software and pdf dumps,and the latest Adobe 9A0-060 question answers ensure you 100% pass and money bcak guarantee.
QUESTION 31
You animate the Scale property of a text layer by using a text animator group. You want the scale value to vary randomly over time. What should you do?
A. select the text layer; choose Window > The Wiggler; select Jagged under the Noise Type pulldown menu; set a value for Frequency and Magnitude; apply
B. select the text layer; under the Text Property Animator 1, select Add > Selector; choose Wiggly; set values for Max Amount, Min Amount, and Wiggles/Sec
C. select the text layer; under the Text Property Animator 1, Range Selector 1, click on the Advanced option; turn Randomize Order on; set a value for Random Speed
D. select the text layer; choose Animation > Add Text Selector; select Wiggly; under the Text Property, select Animator 2 > Wiggly Selector 1; set values for Max Amount, Min Amount, and Wiggles/Sec
Correct Answer: B
QUESTION 32
Click the Exhibit button.
Using a circular mask, you place text on a path. You want to animate the text expanding around the circle as shown in the exhibit.
What should you do?
A. select the mask and animate the Mask Expansion property
B. select and animate the Path Options > First Margin for the text layer
C. choose Animation > Animate Text > Rotation and add keyframes to the Rotation property
D. choose Animation > Animate Text > Tracking and add keyframes to the Tracking Amount property
Correct Answer: D
QUESTION 33
What is the result of dragging a text preset already containing source text onto an existing text layer?
A. The source text of the text layer is replaced.
B. Two Source Text keyframes are created on the text layer.
C. The text layer maintains its source text, but all animators are added to it.
D. A new text layer with the effect is created, with NO change to the original text layer.
Correct Answer: A
QUESTION 34
You want to edit a motion path directly in the Composition window. As you advance through your composition, you notice that you can no longer access the motion path at the beginning of the timeline. What should you do?
A. choose Edit > Preferences > Display and select All Keyframes
B. choose Edit > Preferences > General and select Synchronize Time of All Related Items
C. choose Edit > Preferences > Memory & Cache and increase the Maximum RAM Cache Size
D. choose Edit > Preferences > General and select Preserve Constant Vertex Count when Editing Masks
Correct Answer: A
QUESTION 35
Click the Exhibit button.
Cisco 642-892 Doc,Latest Upload Cisco 642-892 Exam Questions Vce Online
GOOD NEWS: All the new Cisco 642-892 exam questions and answers can get in VCE and PDF format for free on Flydumps.com With Flydumps Cisco 642-892 practice tests, you will pass the exam easily! Free download Cisco 642-892 exam questions vce player all the time.
Exam A
QUESTION 1
Which two statements about 6to4 tunneling are accurate? (Choose two.)
A. Prepending a reserved IPv6 code to the hexadecimal representation of 192.168.0.1 facilitates 6to4 tunneling.
B. Each 6to4 site receives a /48 prefix in a 6to4 tunnel.
C. 2002::/48 is the address range specifically assigned to 6to4.
D. Prepending 0x2002 with the IPv4 address creates an IPv6 address that is used in 6to4 tunneling.
E. 6to4 is a manual tunnel method.
Correct Answer: BD Section: (none) Explanation
Explanation/Reference:
QUESTION 2
Refer to the exhibit. IP multicast for group address 224.1.1.1 has been enabled on all routers in the network. Hosts on Network A receive the multicast traffic. However, hosts on Network B do not. On the basis of outputs provided, what could be the cause of the problem?
A. Router R2 does not have an RP configured on the multicast network.
B. Router R2 does not see the upstream router R1 as a PIM neighbor.
C. Because of RPF failure, Router R2 does not forward multicast packets to Network B.
D. The multicast packets are sourced from a server with an unspecified IP address.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 3
LAB A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference:
Answer: Check certifyme eEngine, Download from Member Center
QUESTION 4
Based on the show ip route isis output on R1, which statement is true?
A. The i su 10.1.0.0/23 route is an IS-IS external route.
B. The R1 IS-IS router is an ASBR.
C. The i su 10.1.0.0/23 route is a suppressed route.
» Read more about: Cisco 642-892 Doc,Latest Upload Cisco 642-892 Exam Questions Vce Online »
Cisco 642-892 Practice Test, Buy software Cisco 642-892 Exam Questions Vce Latest Version PDF&VCE
100% Valid:How to choose the right Cisco 642-892 exam dumps? Just try the Flydumps newest Cisco 642-892 exam dumps with more new added quesitons and answers,also now you can free download Cisco 642-892 VCE player and PDF files for training.
UESTION 1
When an IPv6 enabled host boots, it sends a router solicitation (RS) message.
An IPv6 router responds with a router advertisement (RA). Which two items are contained in the RA? (Choose two.)
A. IPv6 address for the host
B. lifetime of the prefix
C. prefixes for the link
D. keepalive timers
E. request for the local host IP address
F. any route advertisements it has received
Correct Answer: BC Section: (none) Explanation
Explanation/Reference:
QUESTION 2
Refer to the exhibit. Which switch interface configuration command would automatically configure quality of service (QoS) for voice over IP (VoIP) within a QoS domain?
A. auto qos voip cisco-phone
B. mls qos trust
C. switchport priority extend cos 7
D. switchport priority extend trust
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 3
In the use of 802.1X access control, which three protocols are allowed through the switch port before authentication takes place? (Choose three.)
A. STP
B. CDP
C. EAP MD5
D. TACACS+
E. EAP-over-LAN F. protocols not filtered by an ACL
Correct Answer: ABE Section: (none) Explanation
Explanation/Reference:
QUESTION 4
Which protocol specified by RFC 2281 provides network redundancy for IP networks, ensuring that user traffic immediately and transparently recovers from first-hop failures in network edge devices or access circuits?
A. STP
B. IRDP
C. ICMP
D. HSRP
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 5
Which two statements about the IS-IS routing protocol are true? (Choose two.)
A. In the IS-IS routing domain, routers may have adjacencies with other routers on multipoint links.
Cisco 642-892 Cert,Buy Discount Cisco 642-892 Answers Latest Version PDF&VCE
Attention Please:Professional new version Cisco 642-892 PDF and VCE dumps can now free download on Flydumps.com,all are updated timely by our experts covering all Cisco 642-892 new questions and questions.100 percent pass your exam.
Exam A QUESTION 1
Based on the exhibited command output, which two statements are true? (Choose two.)
A. The EIGRP network is stable.
B. The router at 10.1.1.3 has not replied to the R1 query packet.
C. The route to 172.19.0.0/16 is undergoing recomputation.
D. The route to 172.19.0.0/16 is stuck-in-active.
E. R1 has sent a query packet to 10.1.1.2.
Correct Answer: CE Section: (none) Explanation
Explanation/Reference:
QUESTION 2
Which two multicast IP addresses can be represented by the multicast MAC address 0100.5e0A.0A07? (Choose two.)
A. 228.10.10.7
B. 228.10.10.8
C. 228.10.138.7
D. 229.11.10.7
E. 229.138.10.7
F. 229.138.10.8
Correct Answer: AE Section: (none) Explanation
Explanation/Reference:
QUESTION 3
Which statement is true about EBGP?
A. An internal routing protocol can be used to reach an EBGP neighbor.
B. The next hop does not change when BGP updates are exchanged between EBGP neighbors.
C. A static route can be used to form an adjacency between neighbors.
D. EBGP requires a full mesh.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 4
Which statement is true about 802.1x port-based authentication?
A. Hosts are required to have a 802.1x authentication client or utilize PPPoE.
B. Before transmitting data, an 802.1x host must determine the authorization state of the switch.
C. RADIUS is the only supported authentication server type.
D. TACACS+ is the only supported authentication server type.
E. If a host initiates the authentication process and does not receive a response, it assumes it is not authorized.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 5
Which three statements are true about the Internet Group Management Protocol (IGMP)? (Choose three.)
A. IGMP is a multicast routing protocol that makes packet-forwarding decisions independent of other routing protocols such asEIGRP.
» Read more about: Cisco 642-892 Cert,Buy Discount Cisco 642-892 Answers Latest Version PDF&VCE »
Cisco 642-832 Certification Material Provider, Latest Updated Cisco 642-832 Preparation Materials On Our Store
Flydumps ensures Cisco 642-832 study guide are the newest and valid enough to help you pass the test.Please visit Flydumps.com and get valid Cisco 642-832 PDF and VCE exam dumps with free new version.100% valid and success.
Exam A
QUESTION 1
The following commands are issued on a Cisco Router:
Router(configuration)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1
Router(configuration)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1
Router(configuration)#exit
Router#debug ip packet 199
What will the debug output on the console show?
A. All IP packets passing through the router
B. Only IP packets with the source address of 10.1.1.1
C. All IP packets from 10.1.1.1 to 172.16.1.1
D. All IP Packets between 10.1.1.1 and 172.16.1.1
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
Explanation:
In this example, the “debug ip packet” command is tied to access list 199, specifying which IP packets
should be debugged. Access list 199 contains two lines, one going from the host with IP address 10.1.1.1
to 172.16.1.1 and the other specifying all TCP packets from host 172.16.1.1 to 10.1.1.1.
QUESTION 2
What level of logging is enabled on a Router where the following logs are seen?
%LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
A. alerts
B. critical
C. errors
D. notifications
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
Explanation:
Cisco routers, switches, PIX and ASA firewalls prioritize log messages into 8 levels (0-7), as shown below: LevelLevel NameDescription 0 Emergencies System is unusable 1 Alerts Immediate action needed 2 Critical Critical conditions 3 Errors Error conditions 4 Warnings Warning conditions 5 Notifications Informational messages 6 Informational Normal but significant conditions 7 Debugging Debugging messages
When you enable logging for a specific level, all logs of that severity and greater (numerically less) will be logged. In this case we can see that logging level of 3 (as seen by the 3 in “LINK-3- UPDOWN”) and level 5 (as seen by the 5 in “LINEPROTO-5-UPDOWN”) are shown, which means that logging level 5 must have been configured. As shown by the table, logging level 5 is Notifications.
Cisco 642-832 Exam Demo, Help To Pass Cisco 642-832 Real Exam Will Be More Popular
The 100% valid latest Cisco 642-832 question answers ensure you 100% pass! And now we are offering the free Cisco 642-832 new version along with the VCE format Cisco 642-832 practice test. Free download more new Cisco 642-832 PDF and VCE on Flydumps.com.
Testlet 1
TSHOOT 642-832
TICKET NUMBER 1
CLICK NEXT FOR THE TOPOLOGY & SHOW RUNNING CONFIG
AGAIN CLICK NEXT FOR THE QUESTIONS WHERE YOU WE WILL ALSO GET TOVIEW TOPOLOGY & DEVICE CONFIG
AFTER ANSWERING THE FIRST TICKET CLICK ON ‘END’ FOR THE NEXT TICKET.
ASW1
!
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ASW1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
ip cef
!
!
no ip domain lookup
ip domain name lab.local
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
interface Port-channel13 switchport trunk native vlan 200switchport mode trunkswitchport trunk allowed vlan 1-9,10-20,200
!
interface Port-channel23 switchport trunk native vlan 200switchport mode trunkswitchport trunk allowed vlan 1-9,10-20,200
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1no ip addressshutdown duplex autospeed auto
!
!
!
interface FastEthernet1/0/1switchport access vlan 10spanning-tree portfastswitchport port-security
!
Cisco 642-832 certifications Dump, Free Download Real Cisco 642-832 Exam With New Discount
ATTENTION: Get your Cisco 642-832 certification easily with，Flydumps latest Cisco 642-832 exam dumps. All the up-to-date questions and answers were added to the new version. Go to the site Flydumps.com to get more Cisco 642-832 exam
information.
Exam A
QUESTION 1
Which two statements about the Cisco Aironet Desktop Utility (ADU) are true? (Select two)
A. The Aironet Desktop Utility (ADU) profile manager feature can create and manage only one profile for the wireless client adapter.
B. The Aironet Desktop Utility (ADU) can support only one wireless client adapter installed and used at a time.
C. The Aironet Desktop Utility (ADU) can be used to establish the association between the client adapter and the access point, manage authentication to the wireless network, and enable encryption.
D. The Aironet Desktop Utility (ADU) and the Microsoft Wireless Configuration Manager can be used at the same time to configure the wireless client adapter.
Correct Answer: BC Section: (none) Explanation
Explanation/Reference:
QUESTION 2
At which layer of the OSI model does the Spanning Tree Protocol (STP) operate at?
A. Layer 5
B. Layer 4
C. Layer 3
D. Layer 2
E. Layer 1
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 3
In computer networking a multicast address is an identifier for a group of hosts that have joined a multicast group. Multicast addressing can be used in the Link Layer (OSI Layer 2), such as Ethernet Multicast, as well as at the Internet Layer (OSI Layer 3) as IPv4 or IPv6 Multicast. Which two descriptions are correct regarding multicast addressing?
A. The first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value that indicates a multicast application.
B. The last 3 bytes (24 bits) of the multicast MAC address are 0x01-00-5E. This is a reserved value that indicates a multicast application.
C. To calculate the Layer 2 multicast address, the host maps the last 23 bits of the IP address into the last 24 bits of the MAC address. The high-order bit is set to 0.
D. The first 3 bytes (24 bits) of the multicast MAC address are 0x01-00-5E. This is a reserved value that indicates a multicast application.
