CCNA 200-301 dumps 2024 has been updated with new 200-301 exam practice questions, it is your best choice to pass the exam.
The Cisco 200-301 exam is updated all the time, meaning you need to align with the latest Cisco exam using the CCNA 200-301 dumps 2024 new questions to ensure a successful pass.
The Pass4itSure CCNA 200-301 dumps 2024 paves the way for you to achieve excellent results in the Cisco Certified Network Associate 200-301 certification exam on your first attempt. Download it now https://www.pass4itsure.com/200-301.html use PDF or VCE tools to help you study easily and prepare for the CCNA certification exam.
Go ahead and share some CCNA 200-301 dumps 2024 exam practice questions for free:
From： Pass4itSure
Exam Name： Implementing and Administering Cisco Solutions (CCNA) (Include Newest Simulation Labs)
Free Share：13/1376
Related exam： More…Cisco exam
CCNA 200-301 exam practice questions Q1-Q13 have been shared in the previous article, and now continue to share Q14-Q27:
Q14:
Which plane is centralized by an SON controller?
A. management-plane
B. control-plane
C. data-plane
D. services-plane
Correct Answer: B
Q15:
How can the Cisco Discovery Protocol be used?
A. to allow a switch to discover the devices that are connected to its ports
B. to determine the hardware platform of the device
C. to determine the IP addresses of connected Cisco devices
D. all of the above
Correct Answer: D
Q16:
What is the purpose of an SSID?
A. It provides network security
B. It differentiates traffic entering access posts
C. It identifies an individual access point on a WLAN
D. It identifies a WLAN
Correct Answer: D
In IEEE 802.11 wireless local area networking standards (including Wi-Fi), a service set is a group of wireless network devices that share a service set identifier (SSID) … A service set forms a logical network of nodes operating with shared link-layer networking parameters; they form one logical network segment.
Q17:
Refer to the exhibit.
A network administrator is configuring a router for user access via SSH. The service-password encryption command has been issued. The configuration must meet these requirements:
1. Create the username as CCUser.
2. Create the password as NA!2$cc.
3. Encrypt the user password.
What must be configured to meet the requirements?
A. username CCUser privilege 10 password NA!2$cc
B. username CCUser privilege 15 password NA!2$cc enable secret 0 NA!2$cc
C. username CCUser secret NA!2Sce
D. username CCUser password NA!2$cc enable password level 5 NA!2$cc
Correct Answer: C
To create the username as CCUser, create the password as NA!2$cc, and encrypt the user password, option C is the correct configuration.
Option A only creates the user and sets a plain-text password. Option B sets a privileged level password for enable mode, but it does not create the user or encrypt the password. Option D creates the user and sets a plain-text password but does not encrypt the password. Option C creates the user, sets an encrypted password, and meets all the specified requirements.
Q18:
Which default condition must be considered when an encrypted mobility tunnel is used between two Cisco WLCs?
A. The tunnel uses the IPses protocol for encapsulation.
B. Control and data traffic encryption are enabled.
C. The tunnel uses the EoIP protocol to transmit data traffic.
D. TCP port 443 and UDP 21 are used.
Correct Answer: B
Q19:
Refer to the exhibit. Given the output for this command, if the router ID has not been manually set, what router ID will OSPF use for this router?
Correct Answer: C
The highest IP address of all loopback interfaces will be chosen -> Loopback 0 will be chosen as the router ID.
Q20:
Which feature or protocol is required for an IP SLA to measure UDP jitter?
A. LLDP
B. EEM
C. CDP
D. NTP
Correct Answer: D
IP SLA (Internet Protocol Service Level Agreement) is a feature in Cisco IOS that allows administrators to measure and monitor network performance. One of the types of performance measurements that can be performed using IP SLA is the UDP jitter, which is a measure of the variability in the delay of UDP packets.
To measure UDP jitter using IP SLA, the NTP (Network Time Protocol) feature must be enabled on the device. NTP is used to synchronize the device\’s clock with a reference time source, which is necessary to accurately measure the delay of UDP packets. Without NTP, the device\’s clock may drift over time, leading to inaccurate jitter measurements.
Q21:
Drag and Drop Drag and drop the statements about networking from the left onto the corresponding networking types on the right
Select and Place:
Correct Answer:
Q22:
DRAG DROP
A network engineer is configuring an OSPFv2 neighbor adjacency. Drag and drop the parameters from the left onto their required categories on the right. Not all parameters are used.
Select and Place:
Correct Answer:
Q23:
Which interface is used for out-of-band management on a WLC?
A. management
B. virtual
C. dynamic
D. service port
Correct Answer: D
Out of the band is the service-port interface In-band is the management interface
Q24:
Refer to the exhibit.
A Cisco WLC administrator is creating a new wireless network with enhanced SSID security. The new network must operate at 2.4 Ghz with 54 Mbps of throughput. Which set of tasks must the administrator perform to complete the configuration?
A. Uncheck the Broadcast SSID check box and set the Radio Policy to 802.11a/g only.
B. Check the Broadcast SSID check box and set the Radio Policy to 802.11g only.
C. Uncheck the Broadcast SSID check box and set the Radio Policy to 802.11g only.
D. Check the Broadcast SSID check box and set the Radio Policy to 802.11a only.
Correct Answer: C
Q25:
What is the recommended switch load-balancing mode for Cisco WLCs?
A. source-destination IP address
B. destination IP address
C. destination MAC address
D. source-destination MAC address
Correct Answer: A
Q26:
What is the function of a Layer 3 switch?
A. move frames between endpoints limited to IP addresses
B. transmit broadcast traffic when operating in Layer 3 mode exclusively
C. forward Ethernet frames between VLANs using only MAC addresses
D. flood broadcast traffic within a VLAN
Correct Answer: A
Q27:
DRAG DROP
Drag and drop the DHCP snooping terms from the left onto the descriptions on the right.
Select and Place:
Correct Answer:
(Latest) Cisco CCNA 200-301 exam information:
- Vendor: Cisco
- Exam Name: Implementing and Administering Cisco Solutions
- Exam Code: 200-301
- Exam Format: MCQ
- Duration: 120 minutes
- Languages: English and Japanese
- Price: $300 plus tax
- Associated certification: CCNA
Note! The exam is constantly updated so we say you need the latest CCNA 200-301 dumps 2024 exam practice questions. The main changes are in the following three places, focusing on:
Cisco Certification Changes, Part 2: Associate-Level (CCNA) Overview
ResourceCisco Certifications Changes Part 7 – CCNA Questions and Advice
ResourceCisco Certifications Changes, Part 8: On the New CCNA
CCNA 200-301 2024 new learning materials collated
Welcome to the 200-301 CCNA learning materials roundup. Putting these together is just to help you find what you’re looking for quickly.
If you want to watch the CCNA training video here https://learningnetwork.cisco.com/s/ccna-training-videos
If you prefer the text type, there are also those here
Get certified with Cisco CCNA training https://learningnetworkstore.cisco.com/ccna
https://learningnetwork.cisco.com/s/learning-plan-detail-standard?ltui__urlRecordId=a1c3i0000005hsQAAQ<ui__urlRedirect=learning-plan-detail-standard
Implementing and Administering Cisco Solutions (CCNA) v2.0 – What you’ll learn – How you’ll benefit- What to expect in the exam – Who should enroll Here’s the answer: https://www.cisco.com/c/en/us/training-events/training-certifications/training/training-services/courses/implementing-and-administering-cisco-solutions-ccna.html#~training-details (Source: Cisco)
Representative CCNA 200-301 questions asked on the Q&A platform (Hot)
If I start studying for the CCNA 200-301 exam now, will I still be able to take the exam even if the new version is out?
Answers: A lot of people ask this question, studying for the current 200-301 exam, it would be great if you could take/pass the new exam before it was in place, if not, please be sure to study the updated material.
Is there enough knowledge available through free resources to pass the Cisco 200-301 exam?
Answers: As an EdTech expert for nearly 20 years, I’ve been asked this question a lot. I would say, yes, there are a lot of free resources available for you to learn the theory part, which works, but what about the practical part? How will you put your theoretical knowledge into practice? CCNA 200-301 is more than just a theory exam, it requires good practical knowledge and problem-solving skills. Exam practice questions are also needed to help you get an overview of the exam. So, with free resources alone, your CCNA preparation won’t be as effective. The best thing to do is to combine the use of CCNA 200-301 dumps 2024 with free learning resources to learn.
With our CCNA 200-301 dumps 2024 new 200-301 exam practice questions, as well as the study materials compiled for you, the Cisco CCNA 200-301 exam is not difficult.
Download the CCNA 200-301 dumps 2024 PDF or VCE https://www.pass4itsure.com/200-301.html now to prepare for your exam.
Remember, be sure to use the most up-to-date Cisco CCNA 200-301 study materials.
Good luck!!!
