Valid Cisco 300-615 dumps questions shared by Pass4itsure for helping to pass the Cisco 300-615 exam! Get the newest Pass4itsure 300-615 exam dumps with VCE and PDF here: https://www.pass4itsure.com/300-615.html (97 Q&As Dumps).
Suitable for 300-615 complete Cisco learning pathway
The content is rich and diverse, and learning will not become boring. You can learn in multiple ways through the Cisco 300-615 exam.
- Download
- Watch the video
- Answer practice questions, the actual test
Free Cisco 300-615 dumps download
[PDF] Free Cisco 300-615 dumps download https://drive.google.com/file/d/1BWYyQYt-kNG9sejZc149bQeQNgXgIkeg/view?usp=sharing
Pass4itsure offers the latest Cisco 300-615 practice test free of charge 1-13
QUESTION 1
A fabric interconnect fails to start and the console displays the loader prompt. Which two actions resolve the issue?
(Choose two.)
A. Load an uncorrupt bootloader image.
B. Load an uncorrupt kickstart image.
C. Reconnect L1/L2 cables between the Fis.
D. Reformat the fabric interconnect.
E. Load the correct version of the boot image.
Correct Answer: BE
QUESTION 2
An engineer is troubleshooting a custom AV pair that was created by a client on an external authentication server to
map a read-only role for a specific security domain. Which AV pair solves the problem?
A. shell:domains=Security_Domain_1//Read_Role_1|Read_Role_2
B. shell:domains=Security_Domain_1/Write_Role_1|Read_Role_2
C. shell=Security_Domain_1/Read_Role_1|Read_Role_2
D. shell:domains=Security_Domain_1/Read_Role_1|Read_Role_2
Correct Answer: A
QUESTION 3
Refer to the exhibit. Cisco UCS Manager is being upgraded using the Auto Install feature, but the FSM fails. Which
action resolves the issue?
A. Acknowledge the primary fabric interconnect.
B. Remove the service pack from the subordinate fabric interconnect.
C. Clear the startup version of the default infrastructure pack.
D. Upgrade the firmware of the infrastructure firmware by using the force option.
Correct Answer: C
QUESTION 4
Refer to the exhibit. An attempt to bind the Ethernet interface to vFC fails. Which action resolves the issue?
A. Add the FCoE VLAN to the allowed VLAN list.
B. Configure the FCoE VLAN that corresponds to the vFC VSAN as a private VLAN.
C. Configure the interface as a trunk port.
D. Configure the interface to use the native VLAN of the trunk port.
Correct Answer: C
QUESTION 5
Refer to the exhibit. Interface fc1/5 is offline. Which action should be taken to troubleshoot the issue?
A. Activate the correct zoneset for VSAN 100.
B. Update the FLOGI database to contain the FLOGI entries for interface fc1/5 in VSAN 100.
C. Update the FCNs database to contain names for VSAN 100.
D. Configure the upstream ports and the server ports to be in VSAN 100.
Correct Answer: D
QUESTION 6
Refer to the exhibit. A remote device connected to fc 1/2 fails to come online. Which do you configure to resolve the
issue?
A. remote and local ports to be in the correct VSAN
B. local switch for NPV
C. remote device for NPIV
D. port on remote device as an f-port-channel
Correct Answer: A
QUESTION 7
Refer to the exhibit.
Boot from SAN fails. The host fails to detect the LUNs. You must resolve the issue. Drag and drop the WWPNs on the
left to the correct zones on the right.
QUESTION 8
A network administrator attempts to install an application in the Cisco NX-OS Guest shell and receives an error that
there is not enough space on the disk. Which command must the administrator run to increase the disk space available
in the Guest shell?
A. guestshell growdisk rootfs [size-in-MB]
B. guestshell pvextend rootfs [size-in-MB]
C. guestshell resize rootfs [size-in-MB]
D. guestshell resize2fs rootfs [size-in-MB]
Correct Answer: C
QUESTION 9
Refer to the exhibit. An OSPF adjacency between Router-A and Router-B cannot reach the FULL state. Which action
resolves the issue?
A. Adjust the MTU on Router-A to 1600.
B. Disable the check of the MTU value.
C. Set the OSPF media type to point-to-point.
D. Adjust the MTU on Router-B to 1604.
Correct Answer: B
QUESTION 10
A customer configures HSRP between two data centers that are interconnected with OTV. The configuration succeeds,
but traffic between two ESXi virtual hosts on the same site is routed suboptimally through the OTV overlay. Which two
actions optimize the traffic? (Choose two.)
A. Disable first-hop redundancy.
B. Filter HSRP traffic by using a Layer 3 VACL on the OTV edge devices.
C. Filter HSRP by using a Layer 2 MAC-list on the ESXi vSwitch.
D. Filter HSRP traffic by using a Layer 3 VACL on the ESXi vSwitch.
E. Filter HSRP by using a Layer 2 MAC-list on the OTV edge devices.
Correct Answer: AB
QUESTION 11
DRAG DROP
Drag and drop the actions from the left onto the faults that they resolve on the right. Not all options are used.
Select and Place:
Correct Answer:
QUESTION 12
Refer to the exhibit. vPC between switch1 and switch2 is not working. Which two actions are needed to fix the problem?
(Choose two.)
A. Match vPC domain ID between the two devices.
B. Configure IP address on the interface.
C. Activate VLANs on the vPC.
D. Configure vPC peer link and vPC peer keepalive correctly.
E. Configure one of the switches as primary for the vPC.
Correct Answer: AC
QUESTION 13
You must troubleshoot an issue with DAI on a Cisco Nexus switch. Drag and drop the DAI configuration steps from the
left into the order they must be implemented in on the right.
What customers say about Pass4itsure
Latest discount code “2020PASS” – Pass4itsure
Summarize:
[Q1-Q13] Free Cisco 300-615 dumps pdf download https://drive.google.com/file/d/1BWYyQYt-kNG9sejZc149bQeQNgXgIkeg/view?usp=sharing
Share all the resources: Latest Cisco 300-615 practice questions, latest Cisco 300-615 pdf dumps, Cisco 300-615 exam video learning. Latest update Cisco 300-615 dumps https://www.pass4itsure.com/300-615.html Study hard and practices a lot. This will help you prepare for the 300-615 exam. Good luck!
