Categories
Fortinet Exam Dumps
fortinet nse4_fgt-6.4 dumps (pdf + vce)
fortinet nse4_fgt-6.2 dumps (pdf + vce)
fortinet nse5_faz-6.4 dumps (pdf + vce)
fortinet nse5_faz-6.2 dumps (pdf + vce)
fortinet nse5_fct-6.2 dumps (pdf + vce)
fortinet nse5_fmg-6.4 dumps (pdf + vce)
fortinet nse5_fmg-6.2 dumps (pdf + vce)
fortinet nse6_fml-6.2 dumps (pdf + vce)
fortinet nse6_fnc-8.5 dumps (pdf + vce)
fortinet nse7_efw-6.4 dumps (pdf + vce)
fortinet nse7_efw-6.2 dumps (pdf + vce)
fortinet nse7_sac-6.2 dumps (pdf + vce)
fortinet nse7_sdw-6.4 dumps (pdf + vce)
fortinet nse8_811 dumps (pdf + vce)
Tags
Amazing,100% candidates have pass the Cisco 642-611 exam by practising the preparation material of Flydumps,beacuse the brain dumps are the latest and cover every aspect of Cisco 642-611 eaxm.Download the brain dumps for an undeniable success in Cisco 642-611 exams.
QUESTION 77
Which IOS show command can be used to examine the MPLS VPN label stack for a prefix?
A. show ip route vrf {vrf-name} {ip-prefix}
B. show ip cef {ip-prefix}
C. show ip cef vrf {vrf-name} {ip-prefix}
D. show ip vrf detail
E. show ip bgp vpnv4 all
F. show mpls interfaces
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 78
Using OSPF as the CE-PE routing protocol, when and which router will set the down bit?
A. The PE router will set the down bit when redistributing routes from MP-BGP into OSPF.
B. The PE router will set the down bit when redistributing routes from OSPF into MP-BGP.
C. The CE router will set the down bit when propagating the OSPF route to the PE router.
D. The PE router will set the down bit when propagating the OSPF route to the CE router.
E. The P router will set the down bit when propagating the route to another P router.
F. The PE router will set the down bit when propagating the route to another PE router over MP-BGP.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 79
Which type of VPN implementation is simple and cost effective because all sites connect only to the PE router and as a result optimum routing between sites is enabled by default?
A. peer-to-peer VPN
B. overlapping VPN
C. hub-and-spoke overlay VPN
D. fully-meshed overlay VPN
E. client-server VPN
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 80
Which three fields must be included in MPBGP updates between PE routers in an MPLS network? (Choose three.)
A. VPNv4 address
B. label used for VPN packet forwarding
C. AS path
D. Site of Origin
E. TE path designator
Correct Answer: ABC Section: (none) Explanation
Explanation/Reference:
QUESTION 81
A pair of MPLS routers, operating in the default frame-mode, are connected over two parallel links. Which of the following describes what will happen when they try to establish LDP sessions?
A. Only one LDP session will be established.
B. Multiple LDP sessions, one for each link, will be established and the TCP traffic will be load balanced between the links.
C. Multiple LDP sessions, one for each link, will be established, but only the one with the highest IP address will be active.
D. Multiple LDP sessions, one for each link, will be established, but only the one with the best metric will be active.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 82
Which three statements correctly describe a route target (RT)? (Choose three.)
A. An RT is an extended BGP community.
B. An RT is a 64-bit prefix prepended to a IPv4 address enabling different customers to share the same IP address pool.
C. An RT is attached to IPv4 routing updates for indication of MPLS VPN membership.
D. Multiple RTs can be attached to a single VPNv4 BGP routing update.
E. Each VRF on a PE router can have multiple import RTs configured.
F. Export RTs are manually configured on the CE routers.
Correct Answer: ADE Section: (none) Explanation
Explanation/Reference: QUESTION 83
Within the VRF configuration mode, the import map and the export map commands are used for which purpose?
A. to reference the import and export route-maps that are used to limit the maximum number of routes in a VRF
B. to reference the import and export route-maps that are used to selectively specify additional criteria for route-targets import and export
C. to reference the import and export route-maps that are used to filter the routes that are redistributed into MPBGP
D. to reference the import and export route-maps that are used to set loop avoidance parameters such as SOO
E. mandatory VRF commands to specify the import and export route-targets
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 84
Refer to the exhibit and the following connectivity requirements. Which type of MPLS VPN is being implemented? Sites CE1A and CE1B require connectivity to each other.Sites CE2A and CE2B require connectivity to each other.Site CE1C requires connectivity to sites CE1A, CE1B, CE3A, and CE3B. Site CE2C requires connectivity to sites CE2A, CE2B, CE3A, and CE3B. Sites CE3A and CE3B require connectivity to each other and to CE1C and CE2C.
A. central services MPLS VPN
B. overlapping MPLS VPN
C. simple VPN
D. combinations of overlapping and central services MPLS VPN
E. combinations of simple and central services MPLS VPN
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
Free practice questions for Cisco 642-611 exam.These questions are aimed at giving you an idea of the type of questions you can expect on the actual exam.You will get an idea of the level of knowledge each topic goes into but because these are simple web pages you will not see the interactive and performance based questions – those are available in the Cisco 642-611.
Written by Ralph K. Merritt
We are here to help you study for Cisco certification exams. We know that the Cisco series (CCNP, CCDE, CCIE, CCNA, DevNet, Special and other certification exams are becoming more and more popular, and many people need them. In this era full of challenges and opportunities, we are committed to providing candidates with the most comprehensive and comprehensive Accurate exam preparation resources help them successfully pass the exam and realize their career dreams. The Exampass blog we established is based on the Pass4itsure Cisco exam dump platform and is dedicated to collecting the latest exam resources and conducting detailed classification. We know that the most troublesome thing for candidates during the preparation process is often the massive amount of learning materials and information screening. Therefore, we have prepared the most valuable preparation materials for candidates to help them prepare more efficiently. With our rich experience and deep accumulation in Cisco certification, we provide you with the latest PDF information and the latest exam questions. These materials not only include the key points and difficulties of the exam, but are also equipped with detailed analysis and question-answering techniques, allowing candidates to deeply understand the exam content and master how to answer questions. Our ultimate goal is to help you study for various Cisco certification exams, so that you can avoid detours in the preparation process and get twice the result with half the effort. We believe that through our efforts and professional guidance, you will be able to easily cope with exam challenges, achieve excellent results, and achieve both personal and professional improvement. In your future career, you will be more competitive and have broader development space because of your Cisco certification.
Recent Posts
- Share the latest Cisco 300-440 ENCC dumps exam questions
- Cisco CCNA 200-301 Exam Latest Questions And Perspectives
- Most Accurate And Most Likely Cisco 400-007 Questions Sharing
- New CCNP ENCOR 350-401 Exam Questions And Experience Sharing
- Latest CCNP and CCIE Collaboration Certification 350-801 Exam Questions Online
2023 Pass4itsure Cisco dumps
Cisco CCDA Dumps
- 200-901 dumps (PDF+VCE)
Cisco CCDE Dumps
- 400-007 dumps (PDF+VCE)
Cisco CCDP Dumps
- 300-910 Dumps (PDF+VCE)
- 300-915 Dumps (PDF+VCE)
- 300-920 Dumps (PDF+VCE)
- 350-901 Dumps (PDF+VCE)
Cisco CCIT Dumps
- 100-490 Dumps (PDF+VCE)
Cisco CCNA Dumps
- 200-301 Dumps (PDF+VCE)
Cisco CCNP Dumps
- 350-401 Dumps (PDF+VCE)
- 300-410 Dumps (PDF+VCE)
- 300-415 Dumps (PDF+VCE)
- 300-420 Dumps (PDF+VCE)
- 300-425 Dumps (PDF+VCE)
- 300-430 Dumps (PDF+VCE)
- 300-435 Dumps (PDF+VCE)
- 350-501 Dumps (PDF+VCE)
- 300-510 Dumps (PDF+VCE)
- 300-515 Dumps (PDF+VCE)
- 300-535 Dumps (PDF+VCE)
- 350-601 Dumps (PDF+VCE)
- 300-610 Dumps (PDF+VCE)
- 300-615 Dumps (PDF+VCE)
- 300-620 Dumps (PDF+VCE)
- 300-625 Dumps (PDF+VCE)
- 300-630 Dumps (PDF+VCE)
- 300-635 Dumps (PDF+VCE)
- 350-701 Dumps (PDF+VCE)
- 300-710 Dumps (PDF+VCE)
- 300-715 Dumps (PDF+VCE)
- 300-720 Dumps (PDF+VCE)
- 300-725 Dumps (PDF+VCE)
- 300-730 Dumps (PDF+VCE)
- 300-735 Dumps (PDF+VCE)
- 350-801 Dumps (PDF+VCE)
- 300-810 Dumps (PDF+VCE)
- 300-815 Dumps (PDF+VCE)
- 300-820 Dumps (PDF+VCE)
- 300-825 Dumps (PDF+VCE)
- 300-835 Dumps (PDF+VCE)
Cisco CCT Dumps
- 010-151 Dumps (PDF+VCE)
Cisco CyberOps Associate dumps
- 200-201 Dumps (PDF+VCE)
Cisco CyberOps Professional dumps
- 300-215 Dumps (PDF+VCE)
- 350-201 Dumps (PDF+VCE)