This article mainly takes you through the new Cisco 100-490 exam practice questions (free) and how to prepare for the 100-490 RSTECH exam correctly and efficiently.
Cisco Certified Technician (CCT) 100-490 RSTECH exam
Before taking the exam, you must first understand CCT Collaboration
It can be seen from the title: The name in front of the exam is Cisco Certified Technician (CCT Collaboration), so the question is, what is CCT Collaboration?
From the official explanation: Cisco-certified technicians have the skills to diagnose, restore, repair, and replace critical Cisco network and system equipment at customer sites. Technicians work closely with the Cisco Technical Assistance Center (TAC) to resolve support incidents quickly and efficiently. This certification is available in multiple technical areas, providing Cisco support technicians with the opportunity to expand their areas of expertise.
Retrieved from: https://www.cisco.com/c/en/us/training-events/training-certifications/certifications/entry/technician-cct.html
The CCT Collaboration certification is an entry-level certification for the Cisco network type, and many networks around the world use Cisco’s routing and switching equipment.
Back to the 100-490 RSTECH exam
If you want to earn the Cisco CCT Routing and Switching certification, you need to know everything important to know about the 100-490 RSTECH exam.
The 100-490 exam is an entry-level exam (to kickstart a career in networking), and the Supporting Cisco Routing & Switching Network Devices (100-490 RSTECH) exam is a 90-minute, 60-70-question exam that aligns with Cisco Certified Technicians (CCT Collaboration) certification.
- Exam structure: This exam consists of multiple-choice questions and simulations.
- Exam duration: 90 minutes
- Passing score for the exam: 700 out of 1000
- Exam Fee: $125
- Number of questions: 55-65 questions
- The 100-490 certification is valid for three years
- The exam is available in English, Japanese
- Common exam terms: Router, Switch, Ethernet, TCP/IP, Routing, Switching, VLAN, OSPF, STP, IPv4, IPv6, NAT…
- Direct Audience for the exam: Third-Party Maintenance Field Engineers for Cisco
- Exam Covered Areas (Percentage): General Networking 23%, Cisco Equipment and Hardware 27%, Cisco IOS Software Operation 27%, Cisco IOS Software Operation 27%, Service-Related Knowledge 23%
- Prove through an exam: Your proficiency in routing and switching
- The importance of the exam is reflected in the fact that Cisco’s routing and switching equipment is the backbone of many networks around the world. Talent with this expertise is highly recognized in the job market. Employment is vast.
- Recommended study materials: Practice exams, online forums, online courses, books, etc., can be Cisco official or third-party learning resources
- How to register for the 100–490 exam: Visit the Cisco website and follow the instructions. Create an account – select Exam 100-490 – and pay the exam fee of $125
- The right way to prepare for the exam: Take a step-by-step approach to preparing for the 100–490 exam, using online resources, study guides, and practice exams to enhance your knowledge. Of course, other learning methods are also effective, such as creating study plans, using flashcards, joining online forums to discuss your questions and concerns with other candidates, etc
- 100-490 RSTECH exam career pathway: Network Administrator, Network Engineer, or IT Consultant
Preparation for the exam method sharing
Now that we’ve covered the exam, let’s talk about how to prepare for the Cisco 100-490 exam.
As mentioned above, a step-by-step approach should be taken to prepare, specifically:
Understand – Study – Participate – Other
The first step is to understand all about the exam
“Back to the 100-490 RSTECH Exam” we have already elaborated on it, so I won’t go into it here.
The second step is to study the Cisco 100–490 exam study materials
This can be instructor-led courses, e-learning courses, study guides, or trusted third-party 100–490 learning resources.
To that end, I’ve gathered the following 100–490 exam study resource links just for you to learn
https://learningnetwork.cisco.com/s/cct-routing-and-switching-exam-topics
https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/rstech.html#~tutorial
https://learningnetwork.cisco.com/community/certifications/cct_routing_and_switching
https://learningnetworkstore.cisco.com/cisco-certified-technician-routing-and-switching
https://home.pearsonvue.com/cisco
https://www.cisco.com/c/en/us/training-events/training-certifications/certifications/entry/technician-cct.html
https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/100-490-rstech.html
The third step is to take a mock test
This can be a mock exam provided by Cisco that simulates real exam conditions, or it can be a third-party one. Later I will share some free Cisco 100-490 exam practice questions below.
Fourth, other learning resources are supplemented
In addition to what I’ve said, you should supplement your exam preparation with other study resources. For example, join a study group, watch a video, etc. The combination of the two works better.
Okay, how to prepare, after that, let’s move on to the sharing of exam questions.
Free Cisco 100-490 exam practice questions
Practice exam practice questions are the most straightforward and effective way to improve your Cisco 100-490 exam score.
| From: | Quantity: | Related: | Last Updated Questions: |
| Pass4itSure | 15 | Cisco | free 100-490 practice questions |
Question 1:
From a Windows command prompt, which command displays the local IP address of a computer?
A. configuration
B. IP configuration
C. ipconfig
D. ip config
Correct Answer: C
Question 2:
Which two commands set the configuration register value? (Choose two.)
A. rommon>confreg 0x2102
B. router(config)#confreg 0x2102
C. rommon>config-register 0x2102
D. router(config)#configuration-register 0x2102
E. router(config)#config-register 0x2102
Correct Answer: AE
Question 3:
Which type of memory is used to permanently store Cisco IOS Software?
A. NVRAM
B. flash
C. SRAM
D. DRAM
Correct Answer: A
Question 4:
What is the Windows-based program that executes the ping command to test network connectivity?
A. cmd
B. Find
C. Start
D. ipconfig
Correct Answer: A
Question 5:
Cisco NX-OS has added the ability to use which type of custom scripting to help manage user networks.
A. C++
B. Collective
C. SQL
D. Python
Correct Answer: D
Question 6:
TFTP is a simple protocol for transferring files, such as a Cisco IOS or configuration file, from one device to another. Which device can be configured as a TFTP server?
A. Cisco Content Engine
B. modem
C. Cisco router
D. CSU/DSU
Correct Answer: C
Question 7:
Which type of memory stores the configuration of a router or switch by default?
A. RAM
B. ROM
C. NVRAM
D. flash
Correct Answer: A
Question 8:
Which type of memory stores the decompressed form of Cisco IOS Software and the running configuration?
A. flash
B. ROM
C. NVRAM
D. DRAM
Correct Answer: D
Question 9:
Which two ports on a laptop are used to gain console access to a Cisco switch? (Choose two.)
A. DB-9
B. USB
C. DVI
D. RJ-11
E. RJ-45 Ethernet
Correct Answer: AB
Question 10:
Which command provides detailed information about the components that are installed on a router, such as the model, PID, and serial number?
A. show chassis
B. show items
C. show inventory
D. show router
Correct Answer: C
Question 11:
Which two features are associated with single-mode fiber-optic cable? (Choose two.)
A. consists of a single strand of glass fiber
B. has higher attenuation than multimode fiber
C. carries a higher bandwidth than multimode fiber
D. costs less than multimode fiber
E. operates over less distance than multimode fiber
Correct Answer: AC
Question 12:
Which two statements about a SmartJack are true? (Choose two.)
A. It provides signal conversion.
B. It acts as a concentration point for dial-in and dial-out connections.
C. It operates at Layer 2 of the OSI model.
D. It provides channel testing.
E. It regenerates the signal to compensate for signal degradation from line transmission.
Correct Answer: AE
Question 13:
Which two Cisco Nexus 3400 Series switches support 400-Gbps Ethernet ports? (Choose two.)
A. Cisco Nexus 34180YC
B. Cisco Nexus 34200YC-SM
C. Cisco Nexus 3432D-S
D. Cisco Nexus 3408-S
E. Cisco Nexus 3464C
Correct Answer: CD
Question 14:
At the interface configuration prompt, which command returns you to the main configuration prompt?
A. end
B. clear
C. quit
D. exit
Correct Answer: D
Question 15:
What are two standard fiber-optic connectors? (Choose two.)
A. Lucent
B. rollover
C. subscriber
D. multidimensional
E. crossover
Correct Answer: AC
Pass4itSure Cisco 100-490 exam practice questions total: 60
What is the Network Administrator/Network Engineer Salary in 2024
From a search engine search: The estimated total salary for a Network Administrator/Network Engineer in the United States is $108,095 per year, with an average salary of $100,958 per year.
According to the latest data from Payscale, the average salary of a network administrator is $65,207.
Based on the above information, it can be concluded that the salary of this certification is quite considerable, and the 100-490 exam is worth your attempt.
Conclusion:
Learn about certification, gather all the relevant information about the Cisco 100-490 exam, follow the steps above to prepare for the exam, and choose Pass4itSure 100-490 exam practice questions https://www.pass4itsure.com/100-490.html (Covering all the topics on the exam, you can try the free practice test first!) Practice multiple times, and your exam must be a smooth journey.
