350-801 is an exam related to the CCNP and CCIE collaborative certification, and there should be a right approach to preparing for the exam. This blog brings you the latest CCNP and CCIE Collaborative Certification 350-801 exam questions to help you easily prepare for the exam.
Cisco 350-801 exam and CCNP Collaboration certification and CCIE Collaboration certification
In one sentence, the relationship between the 350-801 exam and the CCNP Collaboration certification and CCIE Collaboration certification is that the 350-801 exam is the core exam for certification.
Exam 350-801 with CCNP Collaboration certification
CCNP Collaboration certification: Validates your expertise in implementing core collaboration technologies, including infrastructure and design, protocols, endpoints, collaboration applications, and more. Earning a CCNP Collaboration certification demonstrates your ability to build solutions to support our hybrid world. The CCNP Collaboration certification makes you an expert, helping teams connect, communicate, and collaborate like never before.
The above explanation is from the official: https://www.cisco.com/site/us/en/learn/training-certifications/certifications/collaboration/ccnp-collaboration/index.html
The relationship between them:
To earn this certification, you need to pass one core exam and one of four concentration exams (optional). The core exam is 350-801. The four intensive exams are 300-810 CLICA v1.1, 300-815 CLACCM v1.1, 300-820 CLCEI v1.1, and 300-835 CLAUTO v1.1
CCIE Collaboration certification with 350-801 exam
CCIE Collaboration certification: Demonstrate your advanced skills in planning, designing, implementing, operating, and optimizing complex enterprise collaboration solutions. The CCIE Collaboration certification proves you are an expert in end-to-end lifecycle skills for complex collaboration solutions.
The above explanation comes from the official: https://www.cisco.com/site/us/en/learn/training-certifications/certifications/collaboration/ccie-collaboration/index.html
The relationship between them: To earn this certification, you must pass two exams: Core Exam + Practice Exam, the core exam in this case the 350-801 exam. The practical exam is CCIE Collaboration Practical Exam v3.1
It is essential to pay attention to the details of the 350-801 exam
Do you need important details about the 350-801 exam? Here’s what you need to prepare for the exam:
What is the 350-801 Exam: The 350-801 is a 120-minute exam related to the CCNP and CCIE Collaborative Certification.
Price to take the exam: $400
Number of exam questions: 90-110
350-801 Passing Score: Variable (approximately 750-850 / 1000)
Cisco 350-801 Exam Topics and Weighting: Infrastructure and Design 20%, Protocols, Codecs and Endpoints 20%, Cisco IOS XE Gateways and Media Resources 15%, Call Control 25%, Quality of Service 10%, Collaboration Applications 10%
Study resources useful for exams: Cisco official resources, study materials, books, videos, discussion groups, third-party resources 350-601 exam questions (can be Pass4itSure), and more
The certifications associated with the exam are: CCNP Collaboration, CCIE Collaboration, Cisco Certified Specialist – Collaboration
What you can do with the exam: Passing the exam and earning the CCNP and CCIE collaboration certifications qualifies IT professionals for senior roles in designing, implementing, and managing Cisco collaboration services in their organization
Exam question types: multiple-choice, simlet, testlet, and mock
Must master popular terms: Cisco Collaboration Core Technologies, Cisco Unified Communications Manager (CUCM), Learn Cisco Unity Connection, Cisco IM and Presence, Cisco Expressway, Codecs, Session Initiation Protocol (SIP)、Call Admission Control (CAC)
What the exam means: Elevate your career trajectory and gain a competitive edge in the job market in a world where remote collaboration is the new normal.
Stay up-to-date on Cisco’s latest collaboration progress
Today’s society has entered the era of intelligent development in seconds. Employees can now work from anywhere and have access to smart products such as audio, video, and messaging tools, making collaboration technology increasingly important in business communication workflows. Due to the rapid development of intelligence, with it, collaboration technology is also constantly changing, and you must: Keep up to date with Cisco’s latest collaboration progress so that you can go one step further, pass the exam, and earn your certification.
Staying up to date with Cisco’s latest collaboration progress can be done by keeping up to date with official information, entering discussion groups, attending various collaboration-related meetings, and more.
Practice the latest 350-801 exam questions (Free)
How to pass the CCNP and CCIE Collaborative Certification 350-801 exam? Once you’ve done that, all that’s left is to practice the 350-801 exam questions.
Enrich your knowledge with multiple practice exams to pass the Cisco (CLCOR 350-801) exam. Start preparing now!
| From: | Number of questions | Last updated |
| Pass4itSure | 15 | Cisco (CLCOR 350-801) exam questions |
Question 1:
Refer to the exhibit.
A collaboration engineer adds a redundant NTP server to an existing Cisco Collaboration solution. On the Cisco UCM OS Administration page, the new NTP server shows as “Not Accessible”. Which action resolves this issue?
A. Delete and re-add the new NTP server via the Cisco UCM command-line interface.
B. Start the NTP service on the new NTP server.
C. Configure the “reach” value as “377” for the new NTP server.
D. Restart NTPD on the Cisco UCM server.
Correct Answer: B
Question 2:
Refer to the exhibit.
When making a call to a Mobile and Remote Access client, what are the combinations of protocol on each of the different sections A-B-C?
A. IP TCP/TLS (A) + SIP TCP/TLS (B) + SIP TLS (C)
B. SIP TCP/TLS (A) + SIP TCP/TLS (B) + SIP TCP/TLS (C)
C. SIP TLS (A) + SIP TLS (B) + SIP TLS (C)
D. SIP TCP/TLS (A) + SIP TLS (B) + SIP TLS (C)
Correct Answer: D
Question 3:
Which two elements of a dial plan define the domains that are accessible and are assigned to an endpoint? (Choose two.)
A. Call Admissions Control
B. Route patterns
C. Calling Search Spaces
D. Translation patterns
E. partitions
Correct Answer: CE
Question 4:
An engineer configures a SIP trunk for MWI between a Cisco UCM cluster and Cisco Unity Connection. The Cisco UCM cluster fails to receive the SIP notification messages. Which two SIP trunk settings resolve this issue? (Choose two.)
A. transmit security status
B. accept unsolicited notification
C. allow charging header
D. accept out-of-band notification
E. accept out-of-dialog refer
Correct Answer: BE
Question 5:
Which two steps should be taken to provision after the Self-Provisioning feature was configured for end users?
A. Dial the self-provisioning IVR extension and associate the phone to an end user.
B. Plug the phone into the network.
C. Ask the Cisco UCM administrator to associate the phone with an end user.
D. Enter the settings menu on the phone and press *,*,# (star, star, pound).
E. Dial the hunt pilot extension and associate the phone with an end user.
Correct Answer: AB
Self-Provisioning Phones:
When the feature is configured, you can provision a phone by doing the following:
•
Plug the phone into the network.
•
Dial the self-provisioning IVR extension.
•
Follow the prompts to configure the phone, and associate the phone with an end user. Depending on how you have configured self-provisioning, the end user may enter the user password, PIN, or an administrative authentication code.
Question 6:
How can an engineer determine location-based CAC bandwidth requirements for Cisco Unified Communications Manager?
A. Set the requirements in the service parameters.
B. Add the requirements for each audio and video codec and how many calls must be supported.
C. Execute the Resource Reservation Protocol to return location-based requirements.
D. Calculate the number of calls against the license for Cisco Unified Border Element to determine calls per location.
Correct Answer: B
Question 7:
On a Cisco catalyst switch which command is required to send CDP packets on a switch port that configures a cisco IP phone to transmit voice traffic in 802.1q frames tagged with the voice VLAN ID 221?
A. Device(config-if)# switchport access vlan 221
B. Device(config-if)# switchport trunk allowed vlan 221
C. Device(config-if)# switchport vlan voice 221
D. Device(config-if)# switchport voice vlan 221
Correct Answer: D
switchport voice vlan {vlan-id | • vlan-id—Configure the phone to forward all voice traffic through the specified VLAN. By default, the Cisco IP Phone forwards the voice traffic with an IEEE 802.1Q priority of 5. Valid VLAN IDs are 1 to 4094.
Question 8:
Which method is used to avoid toll fraud with Cisco Unified Communications Manager calls?
A. call policy service
B. TOLLFRAUD_APP
C. default zone access rules
D. class of service
Correct Answer: D
Question 9:
Which two approaches are taken to implement CAC within Cisco UCM in full-mesh topology? (Choose two.)
A. device pool
B. RSVP-enabled locations
C. location-based CAC
D. Audio Codec Preference List
E. physical location
Correct Answer: BC
Question 10:
An engineer configures a local route group to simplify a dial plan. Where does the engineer set the route groups according to the local route group names that are configured?
A. CSS
B. route pattern
C. device pool
D. route list
Correct Answer: C
Question 11:
An engineer must manually provision a Cisco IP Phone 8845 using SIP. Which two fields must be configured for a successful provision? (Choose two.)
A. Media resources group list
B. SIP profile
C. CSS
D. Location
E. Device security profile
Correct Answer: BE
These are mandatory fields on the device page in CUCM
Question 12:
Which configuration tells a switch part to send Cisco Discovery Protocol packets that configure an attached Cisco IP phone to trust tagged traffic that is received from a device that is connected to the access port on the Cisco IP phone?
A. Router# configure terminal Router(config)# interface gigabit ethernet 5/1 Router(config-if)# platform QoS trust extend
B. Router# configure terminal Router(config)# interface gigabit ethernet 5/1 Router(config-if)# platform QoS trust extend cos 3
C. Router# configure terminal Router(config)# interface gigabit ethernet 5/1 Router(config-if)# platform QoS trust extend cos 5
D. Router# configure terminal Router(config)# interface gigabit ethernet 5/1 Router(config-if)# platform QoS extend trust
Correct Answer: A
Question 13:
A collaboration engineer configures Global Dial Plan Replication for multiple Cisco UCM clusters. The local cluster acts as the hub cluster, and the remaining clusters act as spoke clusters. Which service must the engineer configure on the local cluster?
A. Location Conveyance on intercluster SIP trunks
B. Intercluster Lookup Service
C. Intra-Cluster Communication Signaling
D. Mobility Cross Cluster
Correct Answer: B
Use global dial plan replication to create a global dial plan that spans across the Intercluster Lookup Service (ILS) network. When you enable Global DialPlan Replication, you configure the dial plan component on one cluster, and ILS replicates that information throughout the ILS network. Use global dial plan replication to create a global dial plan that spans across the Intercluster Lookup Service (ILS) network. When you enable Global DialPlan Replication, you configure the dial plan component on one cluster, and ILS replicates that information throughout the ILS network.
Question 14:
Which Cisco Collaboration Edge architecture product allows remote endpoints to leverage corporate- premises Cisco Unified Communications infrastructure?
A. Cisco Webex
B. Cisco VPN Client
C. Cisco Unified Communications Mobile and Remote Access
D. Cisco Umbrella
Correct Answer: C
Question 15:
Which action is required for a firewall configuration on Mobile and Remote Access through Cisco Expressway deployment?
A. The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061: HTTPS: TCP 8443; XMPP: TCP 5222; Media: UDP 36002 to 59999.
B. The internal firewall must allow these inbound and outbound connections between Expressway- and Expressway-E: SIP: HTTPS (tunneled over SSH between and E): TCP 2222: TCP 7001; Traversal Media: UDP 2776 to 2777 (or 36000 to 36011 for large VM/appliance); XMPP: TCP 7400.
C. Do not use a shared address for Expressway-E and Expressway-, as the firewall cannot distinguish between them. If static NAT for IP addressing on Expressway-E is used, ensure that any NAT operation on Expressway– does not resolve the same traffic IP address. Shared NAT is not supported.
D. The traversal zone on Expressway- points to Expressway-E through the peer address field on the traversal zone, which specifies the Expressway-E server address. For dual NIC deployments, set the Expressway-E address using an FQDN that resolves the IP address of the internal interface.
Correct Answer: A
Attach a helpful link to study for the 350-801 exam
- https://learningnetwork.cisco.com/community/certifications/ccnp-collaboration/collaboration-core
- https://www.ciscopress.com/certification/ccnp-collaboration-168820
- https://learningnetwork.cisco.com/groups/6059-ccnp-collaboration-study-group
- https://www.cisco.com/c/en/us/training-events/training-certifications/certifications/professional/ccnp-collaboration.html#~training
- https://learningnetwork.cisco.com/s/collaboration-webinars-and-training-videos
- https://learningnetwork.cisco.com/s/learning-plan-detail-standard?ltui__urlRecordId=a1c3i000003OvPyAAK<ui__urlRedirect=learning-plan-detail-standard
At last
All in all, preparing for the Cisco CCNP and CCIE Collaboration Certification 350-801 exam requires taking the right approach. This method is to pay attention to the details of the 350-801 exam, keep up to date with the latest progress of Cisco’s collaboration, clarify the relationship between the Cisco CCNP and CCIE collaboration certification and the 350-801 exam, and the last step is to practice the Pass4itSure 350-801 exam questions (https://www.pass4itsure.com/350-801.html), and through well-prepared practice, the exam can be guaranteed to be successful.
