If you have the most accurate and up-to-date Cisco 400-007 questions, passing the 400-007 exam is confident. Pass4itSure provides the most accurate and most likely Cisco 400-007 questions (https://www.pass4itsure.com/400-007.html) that can help you strengthen your exam preparation with practice.
This article is designed to provide valuable insights and ideas to effectively prepare for the Cisco CCDE 400-007 exam and improve your likelihood of success.
400-007 Exam Details
How to get the exam: Exam 400-007 is about the Cisco Certified Design Professional (CCDE) certification, proving to the world that you have what it takes to become an elite IT solutions designer. , you need to pass the CCDE written exam (400-007) and the CCDE practical exam to get certified.
Exam Duration: CCDE Written Exam v3.0 400-007 Exam Duration: 120 minutes, CCDE Practice Exam v3.0 Exam Duration: 8 hours
Exam Fees: $1,600 for the CCDE Practice Exam and $450 for the 400-007 Written Exam.
About the update: On February 10, 2025, Cisco will offer a CCDE certification elective course for AI infrastructure. The new v3.1 written and practical exams will be available starting February 9, 2025.
The exam is intended for Expert Network Layout Engineers, Expert Systems Leaders for IT Systems Teams, and Expert Systems Leaders for Construction Teams Responsible for Translating Business Requirements, Budgets, and Operational Constraints into Converged Solution Design.
The best way to study for exams: Test and enhance your knowledge with the most accurate and likely Cisco 400-007 questions you can do
After passing the 400-007 exam, you will be able to develop a career planning direction: network designer, senior network layout engineer, and IT consultant
Exam 400-007 Topics and Weighting: Business Strategy Design 15%, Control, data, management plane and operational design 25%, Network Design 30%, Service Design 15%, Security Design 15%
Number of 400-007 exam questions: 90-110 questions,
Exam Focus: Focus on core enterprise network architecture and technology.
400-007 Exam Format: Closed Book
Relevant certification: Cisco Certified Design Professional
Passing Score: A score of at least 80%.
Is the 400-007 exam worth it: While the cost may seem high, it’s a worthwhile investment in the long run as it opens up new job prospects and proves your skills in an ever-changing career.
New Cisco 400-007 Questions That Are Most Likely To Pass The Exam
The most accurate and likely Cisco 400-007 Questions 1-15 are available here for free. Cisco 352-011 new questions from Pass4itSure new 400-007 question materials, written according to the latest syllabus.
Question 1:
Company XYZ has implemented policy-based routing in its network. Which potential problem must be kept in mind about network reconvergence and PBR?
A. It can limit network scalability
B. It can create micro-loops during re-convergence
C. It increases convergence time.
D. It reduces convergence time.
Correct Answer: A
Policy-based routing adds flexibility and control that other routing techniques do not, however. It gives you a level of control that a routing protocol by itself cannot accomplish. With flexibility, there is typically a cost, and in this case, it\’s scalability and manageability.
Question 2:
Company XYZ has 30 sites using MPLS L3 VPN and the company is now concerned about data integrity. The company wants to redesign the security aspect of its network based on these requirements:
Securely transfer the corporate data over the private WAN
Use a centralized configuration model.
Minimize overhead on the tunneled traffic.
Which technology can be used in the new design to meet the company\’s requirements?
A. S-VTI
B. DMVPN
C. MGRE
D. GET VPN
Correct Answer: D
Question 3:
Which two actions must merchants do to be compliant with the Payment Card Industry Data Security Standard? (Choose two.)
A. conduct risk analyses
B. install firewalls
C. use antivirus software
D. establish monitoring policies
E. establish risk management policies
Correct Answer: BC
Question 4:
Your network operations team is deploying Access Control Lists (ACLs) across your Internet gateways They wish to place an ACL inbound on the Internet gateway interface facing the core network (the “trusted” interface). Which IP address would the ACL need for traffic sourced from the inside interface, to match the source address of the traffic?
A. inside global
B. outside global
C. inside local
D. outside local
Correct Answer: C
Question 5:
Company XYZ asks for design recommendations for Layer 2 redundancy. The company wants to prioritize fast convergence and resiliency elements. In the design. Which two technologies are recommended? (Choose two.)
A. Design MLAG/MC-LAG into the network wherever possible.
B. Configure DHCP snooping on the switches.
C. Use root guard.
D. Use BPDU guard.
E. Use Unidirectional Link Detection.
Correct Answer: AC
UDLD is not related at all.
Root guard help for root election faster.
This question is similar to Q111.
Question 6:
A business invests in SDN and develops its own SDN controller that, due to budget constraints, runs on a single controller. The controller actively places an exclusive lock on the configuration of the devices to ensure it is the only source of changes to the environment. What is the result if the controller fails?
A. All device configurations are in read-only mode until the controller is restored.
B. The control plane is unavailable until the controller is restored.
C. If a device fails, the configuration backup is unavailable
D. Manual changes are only possible until the controller is restored
Correct Answer: A
Question 7:
The controller has a global view of the network, and it can easily ensure that the network is in a consistent and optimal configuration. Which two statements describe a centralized SDN control path? (Choose two.)
A. It significantly improves the latency when performing reactive handling of PACKET_IN events
B. Integrating smart NIC capabilities on the local host level is made easier through rest APIs
C. A centralized controller can support all southbound APIs, which allows for easy integration with legacy equipment
D. It is highly available by design with no single-point-of-failure risks present
E. Scaling of the centralized controller cluster is challenging for services like DHCP and load-balancing
Correct Answer: CE
http://blog.gampel.net/2015/08/centralized-vs-distributed-sdn-control.html
Question 8:
A healthcare customer requested that SNMP traps must be sent over the MPLS Layer 3 VPN service. Which protocol must be enabled?
A. SNMPv3
B. Syslog
C. Syslog TLS
D. SNMPv2
E. SSH
Correct Answer: A
Question 9:
Which extensions to GRE tunneling provide session tracking and in-order packet delivery in exchange for additional state stored in tunnel endpoints?
A. GRE Protocol Type and Checksum extension fields.
B. GRE Version and Reserved0 extension fields.
C. No extension fields are available in the GRE header to track session data and packet sequences.
D. GRE Key and Sequence number extensions.
Correct Answer: D
Question 10:
Refer to the exhibit.
This network is running legacy STP 802.1 d. Assuming “hello_timer” is fixed to 2 seconds, which parameters can be modified to speed up convergence times after a single link/node failure?
A. Only the maximum_transmission_halt_delay and diameter parameters are configurable parameters in 802.1d to speed up the STP convergence process.
B. The max_age and forward delay parameters can be adjusted to speed up the STP convergence process.
C. The transit_delay=5 and bpdu_delay=20 are recommended values, considering hello_timer=2 and the specified diameter.
D. Only the transit_delay and bpdu_delay timers are configurable parameters in 802.1d to speed up the STP convergence process.
Correct Answer: B
Reference: https://www.cisco.com/c/en/us/support/docs/lan-switching/spanning-tree-protocol/19120-122.html
Question 11:
You are designing a large-scale DMVPN network with more than 500 spokes using EIGRP as the IGP protocol. Which design option eliminates potential tunnel-down events on the spoke routers due to the holding time expiration?
A. Increase the hold queue on the physical interface of the hub router.
B. Increase the hold queue on the tunnel interface of the spoke routers
C. Increase the hold queue on the tunnel interface of the hub router
D. Apply QoS for pak_priority class
E. Increase the hold queue on the physical interface of the spoke routers.
Correct Answer: C
Question 12:
Which two types of planning approaches are used to develop business-driven network designs and to facilitate design decisions? (Choose two)
A. cost optimization approach
B. strategic planning approach
C. modular approach
D. tactical planning approach
E. business optimization approach
Correct Answer: BD
Planning Approaches To develop a successful network design, a proper planning approach is required to build a coherent strategy for the overall design. Network designers can follow two common planning approaches to develop business-driven network designs and facilitate design decisions:
1.
Strategic planning approach: Typically targets planning to long-term goals and strategies. For example, a service provider needs to migrate its core from legacy (ATM) to be based on MPLS instead. The design decision in this approach has to cater to long-term goals and plans.
2.
Tactical planning approach: Typically targets planning to overcome an issue or to achieve a short-term goal. For instance, an enterprise might need to provide remote access to some partners temporally (for example, over the Internet) until dedicated extranet connectivity is provisioned. Design decisions in this approach generally need to provide what is required within a limited period and are not necessarily required to consider long-term goals.
Question 13:
Company XYZ runs OSPF in its network. A design engineer decides to implement hot-potato routing architecture. How can this implementation be achieved?
A. Enable iBGP and apply prepend to ensure all prefixes will have the same length of the AS path attribute value.
B. Redistribute the external prefixes onto OSPF and ensure the total metric calculation includes only the ext-value and the value is the same in all ASBRs.
C. Enable OSPF load-balancing over unequal cost path.
D. Redistribute the external prefixes onto OSPF and ensure that the total metric calculation includes external internal values.
Correct Answer: D
Question 14:
Which two technologies enable multilayer segmentation? (Choose two.)
A. policy-based routing
B. segment routing
C. data plane markings
D. firewalls
E. filter lists
Correct Answer: AD
Firewalls for sure. https://community.cisco.com/t5/security-knowledge-base/segmentation-policy-using-sgt-in-pbr-pdf/ta-p/3651240
Question 15:
Which technology is an open-source infrastructure automation tool that automates repetitive tasks for users who work in networks such as cloud provisioning and intraservice orchestration?
A. Ansible
B. Contrail
C. Java
D. Jinja2
Correct Answer: A
Last updated 400-007 exam questions.
There Are Several Ways To Study For The 400-007 Exam Effectively:
- Study the Cisco exam blueprint and start preparing.
- Possessing hands-on expertise in network creation and execution is essential to excel in the CCDE 400-007 exam
- Check out the official Cisco CCDE documentation
- Participate in learning communities and forums to learn from the experiences of successful people
- Pay attention to the online industry information and understand the trends
- Review regularly, find out the weak points, and focus on overcoming
- Practicing with the most accurate and up-to-date Cisco 400-007 questions is a highly effective learning method
Cisco Certified Design Professional Salary
Average Annual Salary: $130,780 Median Annual Salary: $137,500
According to the U.S. Bureau of Labor Statistics, CCDE certification will grow by 8% in the coming years. This means that the careers of CCDE-certified professionals will be secured, and their portfolios will enjoy the best salaries and benefits. And the Cisco Certified Design Specialist’s salary grows with experience.
And the Cisco Certified Design Professional certification with the 10 highest-paying IT certifications for technical professionals:
(Cisco Certified Architect (CCAr)
AWS Certified Solutions Architect
Certified Information Security Manager (CISM)
Microsoft Certified Solutions Expert (MCSE)
Certified Data Management Professional (CDMP)
Project Management Professional (PMP)
Cisco Certified Network Professional Wireless (CCNP Wireless)
Oracle Certified Professional, Java
Certified Information Systems Security Professional (CISSP)
The Cisco Certified Architect (CCAr) within the AWS Certified DevOps Engineer – Specialty) is also relevant. This architect-level certification sits at the top of the Cisco certification pyramid, and becoming a Cisco Certified Design Professional (CCDE) is a prerequisite.
In a word
Conquering the Cisco 400-007 exam requires the most accurate and most likely combination of Cisco 400-007 questions and a variety of other learning styles. By adopting Pass4itSure’s new 400-007 question material (https://www.pass4itsure.com/400-007.html) and other learning resources, you’ll improve your chances of success and stand out from the competition by completing the 400-007 exam and then passing the practice exam to become a Cisco Certified Design Professional. So, take the opportunity to prepare in-depth and confidently move towards your certification goals.
