Pass4itsure share these resources with you. Both VCE and PDF dumps contain the latest Cisco 300-410 exam questions, which will ensure your 300-410 exam 100% passed! You can get 300-410 VCE dumps and 300-410 PDF dumps from Pass4itsure. Please get the latest Pass4itsure 300-410 dumps here: https://www.pass4itsure.com/300-410.html (118 QA Dumps).
Exam Code: 300-410 (Updated 118 Q&As)
Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)
Download The Real Cisco 300-410 PDF Here, Free
[free pdf] Cisco 300-410 PDF [Drive] download https://drive.google.com/file/d/16rJy47I-drUZfyF6KEBlVJM_bhpqu7Kr/view?usp=sharing
Cisco CCNP 300-410 Practice Test Questions Answers
QUESTION 1
Refer to the exhibit. Which configuration configures a policy on R1 to forward any traffic that is sourced from the
192.168.130.0/24 network to R2?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D
QUESTION 2
Refer to the following output:
Router#show ip nhrp detail
1.1.2/8 via 10.2.1.2, Tunnel1 created 00:00:12, expire 01:59:47 TypE. dynamic, Flags: authoritative unique nat
registered used NBMA address:
10.12.1.2
What does the authoritative flag mean in regards to the NHRP information?
A. It was obtained directly from the next-hop server.
B. Data packets are process switches for this mapping entry.
C. NHRP mapping is for networks that are local to this router.
D. The mapping entry was created in response to an NHRP registration request.
E. The NHRP mapping entry cannot be overwritten
Correct Answer: A
QUESTION 3
Refer to the exhibit. A network engineer executes the show ipv6 ospf database command and is presented with the
output that is shown. Which flooding scope is referenced in the link-state type?
A. link-local
B. area
C. As (OSPF domain)
D. reserved
Correct Answer: B
QUESTION 4
What is the output of the following command: show ip vrf
A. Show\\’s default RD values
B. Displays IP routing table information associated with a VRF
C. Show\\’s routing protocol information associated with a VRF.
D. Displays the ARP table (static and dynamic entries) in the specified VRF
Correct Answer: A
QUESTION 5
Refer to the exhibit. An engineer is troubleshooting BGP on a device but discovers that the clock on the device does not
correspond to the time stamp of the log entries. Which action ensures consistency between the two times?
A. Configure the service timestamps log uptime command in global configuration mode.
B. Configure the logging clock synchronize command in global configuration mode.
C. Configure the service timestamps log datetime localtime command in global configuration mode.
D. Make sure that the clock on the device is synchronized with an NTP server.
Correct Answer: D
QUESTION 6
Refer to the exhibit. An IP SLA was configured on router R1 that allows the default route to be modified in the event that
Fa0/0 loses reachability with the router R3 Fa0/0 interface. The route has changed to flow through router R2. Which
debug command is used to troubleshoot this issue?
A. debug ip flow
B. debug ip sla error
C. debug ip routing
D. debug ip packet
Correct Answer: C
QUESTION 7
A. The flow exporter is configured but is not used.
B. The flow monitor is applied in the wrong direction.
C. The flow monitor is applied to the wrong interface.
D. The destination of the flow exporter is not reachable.
Correct Answer: D
QUESTION 8
Refer to the exhibit. After applying IPsec, the engineer observed that the DMVPN tunnel went down, and both spoke-tospoke and hub were not establishing. Which two actions resolve the issue? (Choose two.)
A. Change the mode from mode tunnel to mode transport on R3.
B. Remove the crypto isakmp key cisco address 10.1.1.1 on R2 and R3.
C. Configure the crypto isakmp key cisco address 192.1.1.1 on R2 and R3.
D. Configure the crypto isakmp key cisco address 0.0.0.0 on R2 and R3.
E. Change the mode from mode transport to mode tunnel on R2.
Correct Answer: AD
QUESTION 9
After some changes in the routing policy, it is noticed that the router in AS 45123 is being used as a transit AS router for
several service provides. Which configuration ensures that the branch router in AS 45123 advertises only the local
networks to all SP neighbors?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D
QUESTION 10
Refer to the exhibit.
An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is
preferred if available. How is this issue resolved?
A. Use the icmp-echo command to track both default routes
B. Use the same AD for both default routes
C. Start IP SLA by matching numbers for track and ip sla commands
D. Start IP SLA by defining frequency and scheduling it
Correct Answer: C
Reference:
https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200785-ISP-Failover-with-default-routes-using-I.html
QUESTION 11
Refer to the exhibit.
An IP SLA is configured to use the backup default route when the primary is down, but it is not working as desired.
Which command fixes the issue?
A. R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2 10 track 1
B. R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2
C. R1(config)#ip sla track 1
D. R1(config)# ip route 0.0.0.0.0.0.0.0.1.1.1.1 track 1
Correct Answer: D
Note: By default Static Router AD value-1 hence ip route 0.0.0.0. 0.0.0.0. 1.1.1.1 track 1 means AD-1 which must be
less than of back up route AD.
Define the backup route to use when the tracked object is unavailable.
!— The administrative distance of the backup route must be greater than
!— the administrative distance of the tracked route.
!— If the primary gateway is unreachable, that route is removed
!— and the backup route is installed in the routing table
!— instead of the tracked route.
Reference:
https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200785-ISP-Failover-with-default-routes-using-I.html
https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/118962-configureasa-00.html
QUESTION 12
Refer to the exhibit. Which interface configuration must be configured on the spoke A router to enable a dynamic
DMVPN tunnel with the spoke B router?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B
QUESTION 13
Which is statement about IPv6 inspection is true?
A. It teams and secures bindings for stateless autoconfiguration addresses in Layer 3 neighbor tables
B. It learns and secures bindings for stateful autoconfiguration addresses in Layer 3 neighbor tables
C. It teams and secures bindings for stateful autoconfiguration addresses in Layer 2 neighbor tables
D. It team and secures binding for stateless autoconfiguration addresses in Layer 2 neighbor tables.
Correct Answer: D
Pass4itsure Discount Code 2020
All in all:
Valid Cisco 300-410 PDF https://www.pass4itsure.com/300-410.html This is a suitable way to study, pass the exam. Share Cisco 300-410 pdf download and 300-410 video learning online and practice questions for free.
