Pass4itsure share these resources with you. Both VCE and PDF dumps contain the latest Cisco 300-515 exam questions, which will ensure your 300-515 exam 100% passed! You can get 300-515 VCE dumps and 300-515 PDF dumps from Pass4itsure. Please get the latest Pass4itsure 300-515 dumps here: https://www.pass4itsure.com/300-515.html (59 QA Dumps).
Latest Pass4itsure 300-515 Exam Dumps (PDF) Free Share: https://drive.google.com/file/d/1OcQ1KNVYg7aI0pPvcx7TgUDwiLrv1qUw/view?usp=sharing
100% free, latest Cisco 300-515 practice material:
To start, let’s talk about the different formats:
- Cisco 300-515 exam video
- Cisco 300-515 SPVI exam questions pdf
- Cisco 300-515 SPVI exam practice questions
Cisco CCNP 300-515 SPVI exam practice questions
QUESTION 1
What do EVPN single-active and all-active have in common?
A. They are default gateway redundancy options.
B. They are multihoming mechanisms used for CE devices.
C. They are used to provide single connection from a CE device to a service provider.
D. They are both roles that a designated router can take when MPLS is used with EVPN.
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-2/lxvpn/configuration/guide/b-l2vpncg-asr9000-62x/b-l2vpn-cg-asr9000-62x_chapter_01011.html
QUESTION 2
While troubleshooting an AToM L2VPN service, a network consultant notices that the AC Layer 2 encapsulations are
different. Which action should the consultant take in order to make the MPLS L2VPN work?
A. tag-rewrite on the ingress and egress PE router
B. interworking IP configuration on the last PE router before label disposition
C. nonrouted interworking setup to properly translate only the Layer 2 information from the AC
D. interworking IP configuration on both the AC terminations on the PEs
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_l2_vpns/configuration/xe-16-11/mp-l2-vpnsxe-16-11-book/l2vpn-interworking.html
QUESTION 3
Refer to the exhibit. A network engineer has been called to configure the four PE devices in order to enable full
communication among the four CE devices connected to them. While starting to configure, he experienced a
connectivity issue. Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.)
A. Configure PE3 to export route-targets 100:1 and 200:2.
B. Configure PE3 to import route-targets 100:1 and 200:2.
C. Configure PE4 to import route-targets 101:1 and 202:2.
D. Configure PE2 to export route-targets 300:3 and 400:4.
E. Configure PE1 to import route-targets 300:3 and 400:4.
Correct Answer: AB
QUESTION 4
DRAG DROP
Drag and drop the EVPN components from the left onto the correct planes on the right.
Select and Place:
Reference: https://www.cisco.com/c/dam/m/en_us/network-intelligence/service-provider/digitaltransformation/knowledge-network-webinars/pdfs/0420-epn-ckn.pdf slide 8
QUESTION 5
Which two statements about MPLS L3 VPN RDs are true? (Choose two.)
A. They enable EIGRP to use address families to separate traffic between IPv4 and VPNv4.
B. They are represented as 32-bit values
C. They are represented as 64-bit values.
D. They enable OSPF to import and export routes into the global routing table of a router.
E. They allow BGP to uniquely identify duplicate routes.
Correct Answer: CE
QUESTION 6
Refer to the exhibit. Which statement about this output is true?
A. The router IP 192.168.1.2 sent an implicit null, and the output is from the penultimate LSR.
B. The adjacent router is the egress LSR and has mpls ldp explicit-null configured.
C. The adjacent LSR router configured mpls label range 0.
D. The zero in the second column is the normal behavior of an egress router LSR.
Correct Answer: B
QUESTION 7
Refer to the exhibit. Which statement describes the result of this configuration?
A. R1 redistributes BGP routes into the OSPF process of VRF custabc as E1 routes.
B. R1 redistributes BGP routes into the OSPF process of VRF custabc as E2 routes.
C. R1 mutually redistributes routes between BGP 65001 and the OSPF process of VRF custabc.
D. R1 redistributes BGP routes into the OSPF process of VRF custabc as OIA routes.
Correct Answer: A
QUESTION 8
You try to configure MPLS VPN VRF Selection based on a source IP address on an interface that has VRF configured,
but you receive an error. Which action must you take to correct the problem?
A. Change the source IP address.
B. Add the IP address to the VRF table.
C. Remove the VRF from the interface.
D. Configure static routes for the VRF.
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/vrfselec.html
QUESTION 9
Which mechanism reduces the network flooding caused by host ARP learning behavior?
A. ARP suppression
B. storm control
C. root guard
D. BPDU guard
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/white-paperc11-735015.html
QUESTION 10
An engineer is troubleshooting an EoMPLS circuit on a Cisco IOS XR router interface that removes a VLAN from the
distribution layer. Which configuration should the engineer apply in order to accomplish the task?
A. interface GigabitEthernet 0/10.l2transport encapsulation dot1q 10 rewrite ingress tag pop 1 symmetric l2vpn xconnect
group 103588 p2p 103588 interface GigabitEthernet 0/10.10 neighbor ipv4 10.10.10.2 pw-id 103588
B. interface GigabitEthernet 0/10.10 encapsulation dot1q 10 rewrite ingress tag pop 1 symmetric l2vpn xconnect group
103588 p2p 103588 interface GigabitEthernet 0/10.10 neighbor ipv4 10.10.10.2 pw-id 103588
C. interface GigabitEthernet 0/10.10 l2transport encapsulation dot1q 10 l2vpn xconnect group 103588 p2p 103588
interface GigabitEthernet 2/10.10 neighbor ipv4 10.10.10.2 pw-id 103588
D. interface GigabitEthernet 0/10.10 l2transport encapsulation dot1q 10 rewrite ingress tag translate 1-to-1 dot1ad 10
symmetric l2vpn xconnect group 103588 p2p 103588 interface GigabitEthernet 0/10.10 neighbor ipv4 10.10.10.2 pw-id
103588
Correct Answer: C
QUESTION 11
An engineer is troubleshooting AToM on an IOS XE router and receives an error when creating the xconnect. Which
command does he need to complete to create the xconnect in AToM?
A. encapsulation mpls
B. encapsulation 12tpv3
C. protocol 12tpv3
D. protocol none
Correct Answer: A
QUESTION 12
Refer to the exhibit. Which statement about this command is true?
A. It must be configured on each PE router to enable the PE routers to receive multicast traffic for this particular MVRF.
B. It is used to set the designated router on a link using PIM-SM.
C. It must be configured on the PE and CE router to enable MP-BGP to send labels for CSC.
D. It is used to set the router that will server as the root bridge for STP.
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr1000/configuration/guide/chassis/asrswcfg/lsmmldp.html
QUESTION 13
Which two frames can be configured on an Ethernet flow point? (Choose two.)
A. of a specific VLAN
B. with different type of service values
C. with identical type of service value
D. with different class of service values
E. with no tags
Correct Answer: AE
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/configuration/xe-3s/asr903/16-5-1/b-cexe-16-5-asr900/trunk-efp-support.html
Pass4itsure offers valid Cisco 300-515 dumps:
Cisco 300-515 dumps pdf free [pdf] https://drive.google.com/file/d/1OcQ1KNVYg7aI0pPvcx7TgUDwiLrv1qUw/view?usp=sharing
Buy Cisco 300-515 exam dumps and get discount
Please read the picture carefully to get 12% off!
P.S.
The above shared, prepare to pass Cisco 300-515 exam: 300-515 exam video, 300-515 SPVI exam questions pdf, 300-515 SPVI exam practice questions and purchase discount codes. The key to success is to get Cisco 300-515 dumps https://www.pass4itsure.com/300-515.html most reliable 300-515 exam dumps materials.
