Valid Microsoft MD-100 questions shared by Pass4itsure for helping to pass the Microsoft MD-100 exam! Get the newest Pass4itsure Microsoft MD-100 exam dumps with VCE and PDF here: https://www.pass4itsure.com/md-100.html (229 Q&As Dumps).
[Free PDF] Microsoft MD-100 pdf Q&As https://drive.google.com/file/d/117Bi-hSNxnbaAL819nvSoSg5u7Rcbwxp/view?usp=sharing
Suitable for MD-100 complete Microsoft learning pathway
Microsoft MD-100 Windows 10
The content is rich and diverse, and learning will not become boring. You can learn in multiple ways through the Microsoft MD-100 exam.
- Download
- Answer practice questions, the actual Microsoft MD-100 test
Free Microsoft MD-100 dumps download
[PDF] Free Microsoft MD-100 dumps pdf download https://drive.google.com/file/d/117Bi-hSNxnbaAL819nvSoSg5u7Rcbwxp/view?usp=sharing
Pass4itsure offers the latest Microsoft MD-100 practice test free of charge 1-13
QUESTION 1
You have a computer that runs Windows 10. The computer contains a folder named C:\ISOs that is shared in ISOs. You
run several commands on the computer as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information
presented in the graphic. NOTE: Each correct selection is worth one point.
Hot Area:
QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
A user named User1 has a computer named Computer1 that runs Windows 10. Computer1 is joined to an Azure Active
Directory (Azure AD) tenant named contoso.com. User1 joins Computer1 to contoso.com by using
[email protected].
Computer1 contains a folder named Folder1. Folder1 is in drive C and is shared as Share1. Share1 has the permission
shown in the following table.
A user named User2 has a computer named Computer2 that runs Windows 10. User2 joins Computer2 to contoso.com
by using [email protected].
User2 attempts to access Share1 and receives the following error message: “The username or password is incorrect.”
You need to ensure that User2 can connect to Share1.
Solution: You create a local user account on Computer1 and instruct User2 to use the local account to connect to
Share1.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
QUESTION 3
You have computers that run Windows 10 and are configured as shown in the following table.
You have a removable USB drive named USBDrive1 that is encrypted by using BitLocker to Go.
You plan to use USBDrive1 on Computer1, Computer2, and Computer3.
You need to identify on which computers you can enable automatic unlocking of BitLocker on USBDrive1.
Which computers should you identify?
A. Computer2 and Computer3 only
B. Computer3 only
C. Computer1 and Computer3 only
D. Computer1, Computer2, and Computer3
Correct Answer: C
The BitLocker key is stored in the registry when you enable auto-unlock but only if the operating system drive is
encrypted with BitLocker. A TPM is not required.
QUESTION 4
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains a user named UserA.
You have two computers named Computer1 and Computer2 that run Windows 10 and are joined to contoso.com.
You need to ensure that UserA can connect to Computer2 from Computer1 by using Remote Desktop.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. On Computer1, modify the registry.
B. On Computer2, modify the registry.
C. On Computer1, modify the properties of UserA.
D. On Computer1, enable Remote Desktop.
E. On Computer2, modify the properties of UserA.
F. On Computer 2, enable Remote Desktop.
G. On Computer2, add the Everyone group to the Remote Desktop Users group.
H. On Computer1, add the Everyone group to the Remote Desktop Users group.
Correct Answer: EFG
Reference: https://docs.microsoft.com/en-us/windows/client-management/connect-to-remote-aadj-pc
QUESTION 5
You need to meet the technical requirement for User6. What should you do?
A. Add User6 to the Remote Desktop Users group in the domain.
B. Remove User6 from Group2 in the domain.
C. Add User6 to the Remote Desktop Users group on Computer2.
D. And User6 to the Administrators group on Computer2.
Correct Answer: B
QUESTION 6
HOTSPOT
You have the source files shown in the following table.
You mount an image from Image1.wim to a folder named C:\Mount.
You need to add the French language pack to the mounted image.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
Note: The referenced document has the mount directory as C:\Mount\Windows. In this question, the mount directory is
C:\Mount.
Reference: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-language-packs-to-windows
QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You deploy Windows 10 to a computer named Computer1.
Computer1 contains a folder named C:\Folder1. Folder1 contains multiple documents.
You need to ensure that you can recover the files in Folder1 by using the Previous Versions tab.
Solution: You select Folder is ready for archiving from the properties of Folder1.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
The previous versions feature in Windows 10 allows you to restore a previous version of files, folders, and drives that
were saved or backed up as part of a restore point, File History, and/or Windows Backup.
References: https://www.tenforums.com/tutorials/79490-restore-previous-versions-files-folders-drives-windows-10-
a.html
QUESTION 8
Users in the Finance group report that they cannot copy files to Client1\Finance.
You need to resolve the issue.
To complete this task, sign in to the required computer or computers.
Correct Answer: See below.
1.
Open File Explorer.
2.
Browse and find the file or folder you want to have full access.
3.
Right-click it, and select Properties.
4.
Click the Security tab to access the NTFS permissions.
5.
Click the Advanced button.
6.
On the “Advanced Security Settings” page, you need to click the Change link, in the Owner\\’s field.
7.
Click the Advanced button.
8.
On the “Select User or Group” page, click the Find Now button.
9.
From the search result, select your user account, and click OK.
10.On the “Select User or Group” page, click OK.
11.Click Apply
12.Click OK.
13.Click OK again.
14.Click OK one more time to complete this task.
It\\’s important to note that if you\\’re taking ownership of a folder, you can check the Replace ownership on
subcontainers and object option in the Advanced Security Settings page to take control of the subfolders inside of the
folder.
Now you\\’ll need to grant full access control to your account, to do this use the following steps:
1.
Right-click the file or folder and select Properties.
2.
Click the Security tab to access the NTFS permissions.
3.
Click the Advanced button.
4.
Under the Permissions tab, click Add.
5.
Click Select a principal to add your user account.
6.
On the “Select User or Group” page, click the Find Now button.
7.
From the search result, select your user account, and click OK.
8.
On the “Select User or Group” page, click OK.
9.
On “Permission Entry”, check the Full control option.
10.Click OK.
11.Click OK.
12.Click Apply.
13.Click OK.
14.Click OK to close the file or folder properties to complete the task.
You can now assign the necessary permissions to the Finance group.
If you right-click on a file or folder, choose Properties and click on the Security tab, we can now try to edit some
permissions. Go ahead and click the Edit button to get started.
At this point, there are a couple of things you can do. Firstly, you’ll notice that the Allow column is probably greyed out
and can\\’t be edited. This is because of the inheritance I was talking about earlier. However, you can check items on
the Deny column.
When you click the Add button, you have to type in the user name or group name into the box and then click on Check
Names to make sure it\\’s correct. If you don\\’t remember the user or group name, click on the Advanced button and
then just click Find Now. It will show you all the users and groups.
Click OK and the user or group will be added to the access control list. Now you can check the Allow column or Deny
column.
Reference: https://www.windowscentral.com/how-take-ownership-files-and-folders-windows-10 https://www.online-techtips.com/computer-tips/set-file-folder-permissions-windows/
QUESTION 9
Your company has an isolated network used for testing. The network contains 20 computers that run Windows 10. The
computers are in a workgroup. During testing, the computers must remain in the workgroup.
You discover that none of the computers are activated.
You need to recommend a solution to activate the computers without connecting the network to the Internet.
What should you include in the recommendation?
A. Volume Activation Management Tool (VAMT)
B. Key Management Service (KMS)
C. Active Directory-based activation
D. the Get-WindowsDeveloperLicense cmdlet
Correct Answer: B
You can configure one of the computers as a Key Management Service (KMS) host and activate the KMS host by
phone. The other computers in the isolated network can then activate using the KMS host.
Installing a KMS host key on a computer running Windows 10 allows you to activate other computers running Windows
10 against this KMS host and earlier versions of the client operating system, such as Windows 8.1 or Windows 7.
Clients
locate the KMS server by using resource records in DNS, so some configuration of DNS may be required. This scenario
can be beneficial if your organization uses volume activation for clients and MAK-based activation for a smaller number
of servers. To enable KMS functionality, a KMS key is installed on a KMS host; then, the host is activated over the
Internet or by phone using Microsoft\\’s activation services.
References:
https://docs.microsoft.com/en-us/windows/deployment/volume-activation/activate-using-key-management-service-vamt
QUESTION 10
You have a computer that runs Windows 10.
You can start the computer but cannot sign in.
You need to start the computer into the Windows Recovery Environment (WinRE).
What should you do?
A. Turn off the computer. Turn on the computer, and then press F8.
B. Turn off the computer. Turn on the computer, and then press F10.
C. From the sign-in screen, hold the Shift key, and then click Restart.
D. Hold Alt+Ctrl+Delete for 10 seconds.
Correct Answer: C
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/windows-recovery-environment–windowsre–technical-reference
QUESTION 11
You are a network administrator at your company.
The company uses an application that checks for network connectivity to a server by sending a ping request to the IPv6
address of the server. If the server replies, the application loads.
A user cannot open the application.
You manually send the ping request from the computer of the user and the server does not reply. You send the ping
request from your computer and the server replies.
You need to ensure that the ping request works from the user\\’s computer.
Which Windows Defender firewall rule is a possible cause of the issue?
A. File and Printer Sharing (NB-Datagram-In)
B. File and Printer Sharing (Echo Request ICMPv6-Out)
C. File and Printer Sharing (NB-Datagram-Out)
D. File and Printer Sharing (Echo Request ICMPv6-In)
Correct Answer: D
References:
https://www.howtogeek.com/howto/windows-vista/allow-pings-icmp-echo-request-through-your-windows-vista-firewall/
QUESTION 12
Your network contains an Active Directory domain. The domain contains computers that run Windows 10.
You need to provide a user with the ability to remotely create and modify shares on the computers. The solution must
use the principle of least privilege.
To which group should you add the user?
A. Power Users
B. Remote Management Users
C. Administrators
D. Network Configuration Operators
Correct Answer: C
QUESTION 13
You have a computer named Computer1 that runs Windows 10.
You test Windows updates on Computer1 before you make the updates available to other computers.
You install a quality update that conflicts with a custom device driver.
You need to remove the update from Computer1.
What are three possible ways to achieve the goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. From Programs and Features, uninstall an update.
B. From Windows PowerShell, run the Remove-WindowsPackage cmdlet.
C. From an elevated command prompt, run the wusa.exe command and specify the /uninstall parameter.
D. From an elevated command prompt, run the wmic qfe delete command.
E. From System Restore, revert the system state to a restore point that was created before the update was installed.
Correct Answer: ACE
Pass4itsure Microsoft exam dumps discount code share
Summarize:
[Q1-Q13] Free Microsoft MD-100 pdf download https://drive.google.com/file/d/117Bi-hSNxnbaAL819nvSoSg5u7Rcbwxp/view?usp=sharing
Share all the resources: Latest Microsoft MD-100 practice questions, latest Microsoft MD-100 pdf dumps. The latest updated Microsoft MD-100 dumps https://www.pass4itsure.com/md-100.html Study hard and practices a lot. This will help you prepare for the Microsoft MD-100 exam. Good luck!
