Pass4itsure 350-401 dumps The latest exam material update is completed!
Cisco 350-401 exam materials newly upgraded:
- Added more practical exam questions and answers
- The Cisco team’s actual scenario verification is 100% real and effective
- Revise and re-edit all exam materials
In summary! Pass4itsure has fully updated the exam materials for the latest Cisco 350-401 exam and launched 1065 latest exam questions and answers to ensure you pass the exam 100% successfully.
Download Pass4itsure 350-401 dumps: https://www.pass4itsure.com/350-401.html, Use PDF or VCE tools to help you easily complete the target practice plan.
350-401 dumps latest exam material online practice test:
| From | Number of exam questions | Price | Associated certifications |
| Pass4itsure | 15/1065 | Free | Cisco |
Question 1:
Which language defines the structure or modeling of data for NETCONF and RESTCONF?
A. YAM
B. YANG
C. JSON
D. XML
Correct Answer: B
Question 2:
Which DNS lookup does an AP perform when attempting CAPWAP discovery?
A. CAPWAP-CONTROLLER.Local
B. CISCO-CAPWAP-CONTROLLER.Local
C. CISCO-DNA-CONTROLLER.Local
D. CISCO-CONTROLLER.Iocal
Correct Answer: B
Question 3:
DRAG DROP
A network engineer is adding an additional 10Gps link to an existing 2x10Gps LACP-based LAG to augment its capacity. Network standards require a bundle interface to be taken out of service if one of its member links goes down, and the new link must be added with minimal impact on the production network.
Drag and drop the tasks that the engineer must perform from the left into the sequence on the right. Not all options are used.
Select and Place:
Correct Answer:
Question 4:
A customer requires their wireless data traffic to egress at the switch port of the access point. Which access point mode supports this?
A. FlexConnect
B. Sniffer
C. Bridge
D. Monitor
Correct Answer: A
https://study-ccnp.com/cisco-wireless-access-point-ap-modes-explained/
“FlexConnect Mode
FlexConnect AP mode enables switching traffic between an SSID and a VLAN locally if the CAPWAP to the WLC is down, even when the AP is at a remote site. It can also be configured to egress at the access point\’s LAN port.”
Question 5:
What is the advantage of utilizing data models in a multivendor environment?
A. lowering CPU load incurred to managed devices
B. Improving communication security with binary encoded protocols
C. facilitating a unified approach to configuration and management
D. removing the distinction between configuration and runtime state data
Correct Answer: C
Question 6:
Refer to the exhibit.
An engineer attempts to configure a trunk between switch SW1 and switch SW2 using DTP, but the trunk does not form.
Which command should the engineer apply to switch SW2 to resolve this issue?
A. switchport mode dynamic desirable
B. switchport mode access
C. no switchport
D. switchport nonegotiate
Correct Answer: A
DESIRABLE must be paired with AUTO on the other side to form.
Question 7:
What is one benefit of adopting a data modeling language?
A. augmenting management process using vendor-centric actions around models
B. refactoring vendor and platform-specific configurations with widely compatible configurations
C. augmenting the use of management protocols like SNMP for status subscriptions
D. deploying machine-friendly codes to manage a high number of devices
Correct Answer: B
Question 8:
In a Cisco SD-WAN network, which VPN Identifier is reserved as the transport VPN, carrying control traffic?
A. VPN 0
B. VPN 1
C. VPN 512
D. VPN 514
Correct Answer: A
VPN 0–Transport VPN, which carries control traffic via the configured WAN transport interfaces. Initially, VPN 0 contains all of a device\’s interfaces except for the management interface, and all interfaces are disabled.
VPN 512–Management VPN, which carries out-of-band network management traffic among the Viptela devices in the overlay network.
The interface used for management traffic resides in VPN 512. By default, VPN 512 is configured and enabled on all vEdge routers except for vEdge 100. For controller devices, by default, VPN 512 is not configured.
VPNs 1 through 511, and 513 through 65530–VPNs on vEdge routers for service-side data traffic.
https://www.cisco.com/c/en/us/support/docs/routers/12000-series-routers/47321-ciscoef.html
Question 9:
What is one role of the VTEP in a VXLAN environment?
A. to forward packets to non-LISP sites
B. to encapsulate the tunnel
C. to maintain VLAN configuration consistency
D. to provide EID-to-RLOC mapping
Correct Answer: B
Question 10:
A network engineer must configure a switch to allow remote access for all feasible protocols. Only a password must be requested for device authentication and all idle sessions must be terminated in 30 minutes. Which configuration must be applied?
A. line vty 0 15 password cisco transport input telnet ssh exec-timeout 30 0
B. line vty 0 15 password cisco transport input all exec-timeout 0 30
C. username cisco privilege 15 cisco line vty 0 15 transport input telnet ssh login local exec-timeout 0 30
D. line console 0 password cisco exec-timeout 30 0
Correct Answer: A
exec-timeout minutes [seconds]
Question 11:
Which statements are used for error handling in Python?
A. try/catch
B. Try/except
C. block/rescue
D. catch/release
Correct Answer: B
The words “try” and “except” are Python keywords and are used to catch exceptions.
For example:
try:
print 1/0
except ZeroDivisionError:
print \’ Error! We cannot divide by zero!!!\’
Question 12:
In a Cisco SD-WAN solution, which two functions are performed by OMP? (Choose two.)
A. advertisement of network prefixes and their attributes
B. Configuration of control and data policies
C. gathering of underlay infrastructure data
D. delivery of crypto keys
E. Segmentation and differentiation of traffic
Correct Answer: AD
Service routes originated from vEdges/vSmarts
Reachability [vRoutes, TLOCs]
Security [Encryption Keys]
Service routes [Firewall/IDS]
Policies throughout the fabric [Data/App-route Policies]
OMP is the control protocol that is used to exchange routing, policy, and management information between Cisco vSmart Controllers and Cisco IOS XE SD-WAN devices in the overlay network. These devices automatically initiate OMP
peering sessions between themselves, and the two IP endpoints of the OMP session are the system IP addresses of the two devices.
Question 13:
DRAG DROP
Drag and drop the threat defense solutions from the left onto their descriptions on the right.
Select and Place:
Correct Answer:
Question 14:
Refer to the exhibit.
An LACP port channel is configured between Switch-1 and Switch-2, but It fails to come up. Which action will resolve the issue?
A. Configure Switch-1 with channel-group mode active
B. Configure Switch-2 with channel-group mode desirable.
C. Configure Switch-1 with channel-group mode on.
D. Configure SwKch-2 with channel-group mode auto
Correct Answer: A
Question 15:
Refer to the exhibit.
An engineer is investigating why guest users are able to access other guest user devices when the users are connected to the customer guest’s WLAN. What action resolves this issue?
A. Implement MFP client protection
B. Implement split tunneling
C. implement P2P blocking
D. implement Wi-Fi direct policy
Correct Answer: C
Reference: 2.3 Ensure `Peer-to-Peer Blocking Action` is set to `Drop\’ for All `Wireless LAN Identifiers\’ (Scored)
Description:
This control determines whether the Wireless LAN Controller is configured to prevent clients connected to the same Wireless Local Area Controller from communicating with each other.
Wireless Client Isolation prevents wireless clients from communicating with each other over the RF. Packets that arrive on the wireless interface are forwarded only out of the wired interface of an Access Point.
One wireless client could potentially compromise another client sharing the same wireless network.
…
Pass4itsure 350-401 dumps are updated throughout the year! The latest exam materials are guaranteed at all times, and members enjoy free downloads throughout the year!
Practice Pass4itsure 350-401 dumps exam materials to ensure you 100% success in passing the Cisco 350-401 exam.
