Share the good news with you, Pass4Sure Cisco 300-625 exam questions. Good material. A solid 300-625 dumps questions preparation material would be the right choice for passing the Implementing Cisco Storage Area Networking (DCSAN) 300-625 exam.
Questions and answers in the 300-620 dumps are usually expressed in a simple way (PDF plus VCE) and you can easily understand them. Get an updated Cisco CCNP 300-620 exam dumps: https://www.pass4itsure.com/300-625.html With all this, success will come.
Free 300-625 Dumps PDF Questions From Pass4itSure For Cisco
Cisco 300-625 exam pdf [google drive] free download:
https://drive.google.com/file/d/1m2E2k56h10LWHDy71VQiTTDJqwIW93dS/view?usp=sharing Pass4itSure 300-625 pdf part.
If you use the Pass4itSure 300-625 pdf practice material, you will be guaranteed success on the first trial of the exam.
Get Free Updates Cisco DCSAN 300-625 Practice Test
QUESTION 1
Which port mode is used on an NPV device to connect to an NPIV core switch?
A. E
B. F
C. N
D. NP
QUESTION 2
A storage administrator is enabling DH-CHAP for the first time on a Fibre Channel fabric. Which condition must the
Does the administrator consider it while configuring this feature?
A. NTP must be configured on all devices or the configuration fails.
B. The MD5 hash must be used if TACACS+ or RADIUS authentication for FCSP is enabled.
C. All switches on the fabric must be configured for the same password.
D. Enabling the DH-CHAP protocol feature is unsupported on FCIP interfaces.
QUESTION 3
A domain ID conflict is detected on a switch. Which action resolves the issue in the shortest possible time after the
preferred domain ID is changed to a static domain ID?
A. Issue an Fc domain disruptive restart.
B. Issue an Fc domain nondisruptive restart.
C. Enter the commands for a VSAN suspend / no-suspend.
D. Enter the commands to complete a domain manager fast restart.
QUESTION 4
What is the effect of a non-graceful virtual machine shutdown on a virtualized server that is connected to a SAN with
Fibre Channel interfaces?
A. NP Port reload connected to the upstream SAN switch
B. out-of-service Fibre Channel interfaces on the SAN switch
C. frames stuck in the storage system
D. frames stuck in the HBA buffer of the server
QUESTION 5
Refer to the exhibit.
Which configuration change improves the ability of the link to recover from frame loss?
A. Increase the reset timeout.
B. Enable selective acknowledgment.
C. Increase the send buffer size to 15000 KB.
D. Disable PMTU discovery.
QUESTION 6
A storage network engineer must configure a 48-port Cisco MDS switch to reject any login requests to VSAN 10 from
unauthorized Fibre Channel devices and switches. All the devices that were already logged in to the switch from this
VSAN must be allowed without any manual configuration. Which configuration must be applied?
A. switch(config)# feature port-security switch(config)# port-security activate vsan 10
B. switch(config)# feature port-security switch(config)# port-security activate vsan 10 no auto-learn
C. switch(config)# feature port-security switch(config)# port-security database vsan 10 switch(config-port-security)# anywwn interface fc1/1 ?fc1/48
D. switch(config)# port-security activate vsan 10
QUESTION 7
Refer to the exhibit.
A storage network engineer gets remote access to two Cisco MDS 9000 Series Switches with an ISL trunk and receives
several log messages. Which set of actions resolves the problem while least affecting service?
A. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A.
B. 1. Deactivate zone set Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A.
C. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. Remove VSAN 10 from the allowed VSAN range of interface fc1/11 on MDS-A and add it back in the range.
D. 1. Explicitly import zone set Zoneset10-A on MDS-B using the zoneset import interface import fc1/11 can 10 commands.
2. Activate the zone set Zoneset10-A.
QUESTION 8
Which result occurs when a VSAN is deleted that contains non-trunking ports?
A. The ports are moved to VSAN 4094.
B. The ports are moved to VSAN 1.
C. The ports are removed from the configuration.
D. The port configurations are cleared.
QUESTION 9
A storage administrator is upgrading Cisco NX-OS on a Cisco MDS switch. The administrator performs an ISSU
upgrade following the configuration guide. While the install is proceeding, the administrator connects a new server to the switch, which cannot access storage. The existing servers continue to operate properly through the switch.
Why is the new server failing to connect?
A. The fabric data plane resets as part of the upgrade process.
B. The new server is unable to log in to the fabric to receive an FC-ID.
C. The upgrade process disables any currently unused ports.
D. The zoning database is locked during the upgrade process.
QUESTION 10
Which configuration is needed to enable manual ESP mode for Fibre Channel TrustSec on Cisco MDS switches?
A. MDS(config)# interface fc 1/1 MDS(config-if)# fcsp esp manual
B. MDS(config)# fcsp esp manual
C. MDS(config)# interface fc 1/1 MDS(config-if)# fcsp mode gcm MDS(config-if-fcsp)# fcsp esp manual
D. MDS(config)# interface fc 1/1 MDS(config-if)# fcsp esp manual MDS(config-if-fcsp)# mode gcm
QUESTION 11
A storage network engineer is implementing disk-array data replication between two SAN environments in two different data centers not connected via Fibre Channel. Which SAN switch feature must be implemented?
A. FCIP
B. zoning merge over LAN
C. VSAN scoping
D. IVR
QUESTION 12
Refer to the exhibit.
A port-channel has been configured between a Cisco MDS and a Cisco Fabric Interconnect switch. Which interface(s) in
Does the port-channel carry the control plane traffic?
A. per-packet, balanced between interfaces fc1/9 and fc1/10
B. from interface fc1/9
C. from interface fc1/10
D. per flow, balanced between interfaces fc1/9 and fc1/10
QUESTION 13
Which action must be performed to deactivate a VSAN without losing its configuration?
A. Isolate it.
B. Delete it.
C. Rename it.
D. Suspend it.
QUESTION 14
Which result occurs if a device alias is renamed and then the original device alias name is used in an additional command in the same session?
A. Both commands execute successfully.
B. The device alias is renamed and the add command is moved to the rejected list.
C. Both commands are moved to the rejected list.
D. The rename command is moved to the rejected list and the add command executes successfully.
QUESTION 15
Which benefit of upgrading to the Cisco DCNM server-based advanced feature license for a Cisco MDS switch is
correct?
A. The license can be reassigned when a switch is replaced with a newer version within the same product family.
B. The license can be assigned to either server MAC address or switch serial number.
C. An unlimited number of devices can be added to the list of licensed devices.
D. The license can be reassigned when the switch is replaced with a Cisco Nexus switch.
Getting the latest updates will save you a lot of time. Some of the Cisco DCSAN 300-625 exam questions and answers above are all in Pass4itSure.
PS. The correct answer is at the end of the article, this is to prevent you from peeking at the answer.
Well, share this and wholeheartedly recommend Pas4itSure’s learning materials to everyone – 300-625 exam dumps (link https://www.pass4itsure.com/300-625.html) Pass4itSure is a well-known company that provides quality 300-625 learning materials for the preparation of the 300-625 exam.
Here! The correct answer.
| q1 | q2 | q3 | q4 | q5 | q6 | q7 | q8 | q9 | q10 | q11 | q12 | q13 | q14 | q15 |
| D | B | A | B | B | D | A | A | D | A | A | D | D | A | A |
