Tag: 100-490 exam questions
Free Cisco 100-490 Exam Practice Questions And How To Prepare For The Exam
This article mainly takes you through the new Cisco 100-490 exam practice questions (free) and how to prepare for the 100-490 RSTECH exam correctly and efficiently.
Cisco Certified Technician (CCT) 100-490 RSTECH exam
Before taking the exam, you must first understand CCT Collaboration
It can be seen from the title: The name in front of the exam is Cisco Certified Technician (CCT Collaboration), so the question is, what is CCT Collaboration?
From the official explanation: Cisco-certified technicians have the skills to diagnose, restore, repair, and replace critical Cisco network and system equipment at customer sites. Technicians work closely with the Cisco Technical Assistance Center (TAC) to resolve support incidents quickly and efficiently. This certification is available in multiple technical areas, providing Cisco support technicians with the opportunity to expand their areas of expertise.
Retrieved from: https://www.cisco.com/c/en/us/training-events/training-certifications/certifications/entry/technician-cct.html
The CCT Collaboration certification is an entry-level certification for the Cisco network type, and many networks around the world use Cisco’s routing and switching equipment.
Back to the 100-490 RSTECH exam
If you want to earn the Cisco CCT Routing and Switching certification, you need to know everything important to know about the 100-490 RSTECH exam.
The 100-490 exam is an entry-level exam (to kickstart a career in networking), and the Supporting Cisco Routing & Switching Network Devices (100-490 RSTECH) exam is a 90-minute, 60-70-question exam that aligns with Cisco Certified Technicians (CCT Collaboration) certification.
- Exam structure: This exam consists of multiple-choice questions and simulations.
- Exam duration: 90 minutes
- Passing score for the exam: 700 out of 1000
- Exam Fee: $125
- Number of questions: 55-65 questions
- The 100-490 certification is valid for three years
- The exam is available in English, Japanese
- Common exam terms: Router, Switch, Ethernet, TCP/IP, Routing, Switching, VLAN, OSPF, STP, IPv4, IPv6, NAT…
- Direct Audience for the exam: Third-Party Maintenance Field Engineers for Cisco
- Exam Covered Areas (Percentage): General Networking 23%, Cisco Equipment and Hardware 27%, Cisco IOS Software Operation 27%, Cisco IOS Software Operation 27%, Service-Related Knowledge 23%
- Prove through an exam: Your proficiency in routing and switching
- The importance of the exam is reflected in the fact that Cisco’s
» Read more about: Free Cisco 100-490 Exam Practice Questions And How To Prepare For The Exam »
[2021.3] Prep Actual Cisco 100-490 Exam Questions For Free Share
Valid Cisco 100-490 questions shared by Pass4itsure for helping to pass the Cisco 100-490 exam! Get the newest Pass4itsure Cisco 100-490 exam dumps with VCE and PDF here: https://www.pass4itsure.com/100-490.html (150 Q&As Dumps).
[Free PDF] Cisco 100-490 pdf https://drive.google.com/file/d/181ozOk9apg9PVhlKBTOncqMPvMIgQKSu/view?usp=sharing
Suitable for 100-490 complete Cisco learning pathway
The content is rich and diverse, and learning will not become boring. You can learn in multiple ways through the Cisco 100-490 exam.
- DownloadÂ
- Answer practice questions, the actual test
Cisco 100-490 Supporting Cisco Routing & Switching
Free Cisco 100-490 dumps download
[PDF] Free Cisco 100-490 dumps pdf download https://drive.google.com/file/d/181ozOk9apg9PVhlKBTOncqMPvMIgQKSu/view?usp=sharing
Pass4itsure offers the latest Cisco 100-490 practice test free of charge 1-13
QUESTION 1
What is the correct IPv6 address notation?
A. 2001:0DB8::/128
B. 2001:0DB8:0::
C. 2001:0DB8::1:1:1:1:1
D. 2001:0DB8:130F:0000:0000:7000:0000:140B
Correct Answer: D
QUESTION 2
From the enable mode, which command loads the configuration during the password recovery process on a Cisco
router?
A. load_helper
B. configure terminal
C. copy running-config startup-config
D. copy startup-config running-config
Correct Answer: D
QUESTION 3
The colored wires at one end of a cable are in reverse sequence to the colored wires at the other end of the cable.
Which cable does this configuration describe?
A. rolled
B. crossover
C. coaxial
D. straight-through
Correct Answer: B
QUESTION 4
Which two pieces of information are displayed when you use the show ip interface brief command? (Choose two.)
A. Layer 2 address
B. keepalive
C. Layer 3 address
D. encapsulation type
E. interface status
Correct Answer: CE
QUESTION 5
When you deploy Cisco Catalyst 3850 Series switches, which two modes of operation can you choose from?
» Read more about: [2021.3] Prep Actual Cisco 100-490 Exam Questions For Free Share »
[2020.12] Cisco 100-490 Exam Prep Actual Dumps Questions For Free Share
Valid Cisco 100-490 dumps questions shared by Pass4itsure for helping passing Cisco 100-490 exam! Get the newest Pass4itsure 100-490 dumps with VCE and PDF here: https://www.pass4itsure.com/100-490.html (60 Q&As Dumps).
Suitable for 100-490 complete Cisco learning pathway
The content is rich and diverse, and learning will not become boring. You can learn in multiple ways through Cisco 100-490 exam.
- Download
- Watch the video
- Answer practice questions, the actual test
Free Cisco 100-490 dumps download
[PDF] Free Cisco 100-490 dumps download https://drive.google.com/file/d/1iZmmKX56IAeSFBuYvDL7nnR6e7Am76n_/view?usp=sharing
Pass4itsure offers the latest Cisco 100-490 practice test free of charge 1-13
QUESTION 1
Which address facilitates the routing of packets over an IP network?
A. physical
B. transport
C. network
D. MAC
Correct Answer: C
QUESTION 2
A. copy tftp nvram
B. copy tftp flash
C. copy flash tftp
D. copy xmodem flash
Correct Answer: B
QUESTION 3
Which Xmodem option is used to enhance error checking of an image that is copied to flash memory?
A. -e
B. -r
C. -c
D. -x
Correct Answer: C
QUESTION 4
Which type of Cisco console cable is used to connect a laptop to the console port on a Cisco router?
» Read more about: [2020.12] Cisco 100-490 Exam Prep Actual Dumps Questions For Free Share »
