Tag: 642 832 vce
Cisco 642-832 Certification Material Provider, Latest Updated Cisco 642-832 Preparation Materials On Our Store
Flydumps ensures Cisco 642-832 study guide are the newest and valid enough to help you pass the test.Please visit Flydumps.com and get valid Cisco 642-832 PDF and VCE exam dumps with free new version.100% valid and success.
Exam A
QUESTION 1
The following commands are issued on a Cisco Router:
Router(configuration)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1
Router(configuration)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1
Router(configuration)#exit
Router#debug ip packet 199
What will the debug output on the console show?
A. All IP packets passing through the router
B. Only IP packets with the source address of 10.1.1.1
C. All IP packets from 10.1.1.1 to 172.16.1.1
D. All IP Packets between 10.1.1.1 and 172.16.1.1
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
Explanation:
In this example, the “debug ip packet” command is tied to access list 199, specifying which IP packets
should be debugged. Access list 199 contains two lines, one going from the host with IP address 10.1.1.1
to 172.16.1.1 and the other specifying all TCP packets from host 172.16.1.1 to 10.1.1.1.
QUESTION 2
What level of logging is enabled on a Router where the following logs are seen?
%LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
A. alerts
B. critical
C. errors
D. notifications
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
Explanation:
Cisco routers, switches, PIX and ASA firewalls prioritize log messages into 8 levels (0-7), as shown below: LevelLevel NameDescription 0 Emergencies System is unusable 1 Alerts Immediate action needed 2 Critical Critical conditions 3 Errors Error conditions 4 Warnings Warning conditions 5 Notifications Informational messages 6 Informational Normal but significant conditions 7 Debugging Debugging messages
When you enable logging for a specific level, all logs of that severity and greater (numerically less) will be logged. In this case we can see that logging level of 3 (as seen by the 3 in “LINK-3- UPDOWN”) and level 5 (as seen by the 5 in “LINEPROTO-5-UPDOWN”) are shown, which means that logging level 5 must have been configured. As shown by the table, logging level 5 is Notifications.
Cisco 642-832 Exam Demo, Help To Pass Cisco 642-832 Real Exam Will Be More Popular
The 100% valid latest Cisco 642-832 question answers ensure you 100% pass! And now we are offering the free Cisco 642-832 new version along with the VCE format Cisco 642-832 practice test. Free download more new Cisco 642-832 PDF and VCE on Flydumps.com.
Testlet 1
TSHOOT 642-832
TICKET NUMBER 1
CLICK NEXT FOR THE TOPOLOGY & SHOW RUNNING CONFIG
AGAIN CLICK NEXT FOR THE QUESTIONS WHERE YOU WE WILL ALSO GET TOVIEW TOPOLOGY & DEVICE CONFIG
AFTER ANSWERING THE FIRST TICKET CLICK ON ‘END’ FOR THE NEXT TICKET.
ASW1
!
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ASW1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
ip cef
!
!
no ip domain lookup
ip domain name lab.local
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
interface Port-channel13 switchport trunk native vlan 200switchport mode trunkswitchport trunk allowed vlan 1-9,10-20,200
!
interface Port-channel23 switchport trunk native vlan 200switchport mode trunkswitchport trunk allowed vlan 1-9,10-20,200
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1no ip addressshutdown duplex autospeed auto
!
!
!
interface FastEthernet1/0/1switchport access vlan 10spanning-tree portfastswitchport port-security
!