Tag: Cisco 351-080
Cisco 351-080 Free Dowload, Most Reliable Cisco 351-080 Dumps PDF With Low Price
Welcome to download the newest Flydumps 642-427 VCE dumps: http://www.flydumps.com/642-427.html
Moreover, the Cisco 351-080 exam sample questions are worked out by I.T. experts who enable you to Cisco 351-080 practice test questions in order to achieve your goal. FLYDUMPS provide high quality Cisco 351-080 Certified Solutions Associate. It is the best and the latest Cisco 351-080 exam questions. Furthermore, we are constantly updating FLYDUMPS Cisco 351-080 Exam. These Cisco 351-080 test updates are supplied free of charge to Killtest customers. After you purchase FLYDUMPS Cisco 351-080 exam sample questions, you can enjoy one year free update.
QUESTION 75
Nexus7000# config t Nexus700(config)# interface ethernet 2/11 Nexus700(config-if)# switchport mode private-vlan host Nexus700(config-if)# switchport private-vlan host-association 14 50 Nexus700(config-if)# exit Nexus700(config)#
What will this command sequence achieve?
A. associate interface E2/11 to community VLANs 14 and 50
B. associate interface E2/11 to secondary VLANs 14 and 50
C. associate interface E2/11 to primary VLAN 50 and secondary VLAN 14
D. associate interface E2/11 to primary VLAN 14 and secondary VLAN 50
Correct Answer: D
QUESTION 76
Which command will allow you to display the configured QoS group and the ingress buffer allocated to each QoS group?
A. show interface priority-flow-control
B. show interface queuing
C. show queuing interface
D. show policy-map system type queuing
E. show policy-map interface ethernet <x/y> type queuing
Correct Answer: C
QUESTION 77
Refer to the exhibit.
During troubleshooting of Virtual PortChannel (vPC), it is observed that Virtual PortChannel 2 is in a down state. What’s the cause of this issue?
A. Virtual PortChannel is down because LACP is not enabled on the remote switch.
B. Virtual PortChannel is down because of a VLAN mismatch.
C. Virtual PortChannel is down because of an MTU mismatch.
D. Virtual PortChannel is down because of VLAN and MTU mismatch.
Correct Answer: C
QUESTION 78
With Cisco NX-OS on a Cisco Nexus platform, which command shows memory usage, total processes, and CPU state?
Cisco 351-080 Certification Material Provider, Best Quality Cisco 351-080 With 100% Pass Rate
Free Sharing Flydumps Cisco 351-080 exam questions and answers are constantly being revised and updated for relevance and accuracy.Many candidates has passed the Cisco 351-080 exam easily by training the new version.100% pass rate.
QUESTION 56
What does the command “IP ARP synchronize” do in a vPC configuration?
A. Synchronizes ARP entries between vPC peers every five minutes
B. Triggers a manual update of ARP entries from the primary peer to the secondary
C. Enables a bulk loading of ARP entries when a vPC peer is restored
D. Uses the peer-keepalive link to maintain ARP table consistency
Correct Answer: C
QUESTION 57
Nexus# sh ip igmp snooping vlan 120 IGMP Snooping information for vlan 120 IGMP snooping disabled Optimised Multicast Flood (OMF) disabled IGMP querier none Switch-querier enabled, address 1.1.1.1, currently not running IGMPv3 Explicit tracking enabled IGMPv2 Fast leave disabled IGMPv1/v2 Report suppression enabled IGMPv3 Report suppression disabled Link Local Groups suppression enabled Router port detection using PIM Hellos, IGMP Queries Number of router-ports: 0 Number of groups: 0 Active ports: Po100 Po111
Which statement best describes what is depicted in the show command output?
A. IGMP snooping is not active for VLAN 120 because the IGMP feature has not been enabled on the switch with the feature igmp command.
B. The IGMP snooping querier for VLAN 120 is not in a running state because the Loopback interface configured with 1.1.1.1/32 is currently in a down state.
C. IGMP snooping has been disabled on the VLAN 120 SVI.
D. IGMP snooping has been disabled for VLAN 120 in VLAN configuration mode.
E. IGMP snooping is not active for VLAN 120 because VLAN 120 does not exist in the VLAN database.
Correct Answer: D
QUESTION 58
What is the default Time to Live (TTL) value in Cisco FabricPath?
A. 128
B. 32
C. 64
D. Dependent on the number of switch IDs in the topology
Correct Answer: B
QUESTION 59
Assuming the local peer is 10.0.0.1 and the remote peer (configuration not shown) is 10.0.0.2, which of these is used to configure PIM Anycast-RP on a Nexus 7000 switch?
