Tag: Cisco 642-661
Studying The Latest Version Cisco 642-661 Braindumps Pass Exam Easily
Fully Updated Do not hesitate to choose Flydumps Cisco 642-661 VCE Exam Dumps, all are updated timely by SAP expert professionals. Visit the site Flydumps.com to get the free Cisco 642-661 pdf dumps and free vce player.
Exam A QUESTION 1
Look at the picture.
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference:
Answer: Check certifyme eEngine, Download from Member Center
QUESTION 2
What are two purposes of the BGP scan-time command? (Choose two.)
A. to tune the BGP process which walks the BGP table and confirms the reachability of next hops
B. to allow faster detection of downed BGP peers
C. to improve BGP convergence time
D. to tune the BGP update interval
E. to decrease the effects of unstable routes by increasing the route suppression time
Correct Answer: AC Section: (none) Explanation
Explanation/Reference:
QUESTION 3
Which command is used to configure the external, confederation-wide AS number?
A. router(config)#router bgp {as-number}
B. router(config-router)#bgp confederation peers {as-number}
C. router(config-router)#bgp confederation identifier {as-number}
D. router(config-router)#bgp cluster-id {as-number}
E. router(config-router)#neighbor {ip address} remote-as {as-number}
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 4
When creating iBGP multipaths which three criteria must be met by multiple paths to the same destination? (Choose three.)
A. Router IDs must be the same on all routers.
B. Each destination must have a different next-hop address.
C. The destination AS-number must be different for each destination.
D. Multi-exit discriminator attributes must be the same on all paths.
E. Interior Gateway Protocol distance must be identical on each path.
Correct Answer: BDE Section: (none) Explanation
Explanation/Reference:
QUESTION 5
Lab
A.
» Read more about: Studying The Latest Version Cisco 642-661 Braindumps Pass Exam Easily »
Real Cisco 642-661 Exam Questions Updated All New Added Questions
Attention Please: Professional new version Cisco 642-661 PDF and VCE dumps can now free download on Flydumps.com all are updated timely by our experts covering all new questions and questions.100 percent pass your Cisco 642-661 exam.
Exam A
QUESTION 1
Exhibit: Certkiller router#show ip route Codes: C – connected, S – static, I – IGRP, R – RIP, M – mobile, B – BGP D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2 E1 – OSPF external type 1, E2 – OSPF external type 2, EEGP i – IS-IS, L1 – IS-IS level-1, L2 – IS-IS level-2, * -candidate default U – per-user static route, o – ODR T – traffic engineered route Gateway of last resort is not set 172.16.0.0/24 is subnetted, 2 subnets B 172.16.10.0 [20/0] via 10.1.1.100, 00:00:24 B 172.16.11.0 [20/0] via 10.1.1.100, 00:00:24 172.26.0.0/28 is subnetted, 3 subnets B 172.26.1.48 [200/0] via 192.168.1.50, 00:00:31 B 172.26.1.32 [200/0] via 192.168.1.50, 00:00:31 B
172.26.1.16 [200/0] via 192.168.1.50, 00:00:31 10.0.0.0/8 is variable subnetted, 2 subnets, 2 masks B 10.0.0/8 [20/0] via 10.1.1.100, 00:00:24 C 10.1.1.0/24 is directly connected, Serial3 192.168.1.0/28 is subnetted, 3 subnets C 192.168.1.32 is directly connected, Serial1 C 192.168.1.48 is directly connected, Serial2 C 192.168.1.16 is directly connected, Serial0 192.168.2.0/24 is variably subnetted, 2 subnets, 2 masks B 192.168.2.64/28 [20/0] via 10.1.1.100,
00:00:26
Based on the show ip route output in the exhibit, how can you tell if a BGP route is learned via IBGP or EBGP?
A.
By the Metric
B.
By the Next Hop
C.
By the Admin Distance
D.
By the code “B” or “B Ex”
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
Explanation: admin distance. Distance of EBGP is 20, Distance of IBGP is 200.
QUESTION 2
What is the range of values from which an ISP can assign a private AS number?
A. 32768 to 65535
B. 64512 to 65535
C. 65101 to 65535
D. 65001 to 65535
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
Explanation: An autonomous system (AS) is a collection of networks under a single technical administration. Some other definitions refer to a collection of routers or IP prefixes, but in the end they all mean the same entity. The important principle is the technical administration, which means sharing the same routing protocol and routing policy. Legal and administrative ownership of the routers does not matter in terms of autonomous systems. Autonomous systems are identified by AS numbers, 16-bit unsigned quantities ranging from 1 to 65535. Public AS numbers are assigned by Internet registries. For customers that need AS numbers to run BGP in their private networks, a range of private AS numbers (64512 – 65535) has been reserved. Reference: Configuring BGP on Cisco Routers volume 1 p.2-4
QUESTION 3
Network topology exhibit
What can prevent the corresponding BGP session from being successfully established?
» Read more about: Real Cisco 642-661 Exam Questions Updated All New Added Questions »
Studying The Latest Version Cisco 642-661 Braindumps To Pass Exam Easily
[New Updated Questions ] Where to find the newest Cisco 642-661 exam dumps? if you want to pass exam Cisco 642-661 without the second try, you should download the latest updated Cisco 642-661 braindump for preparing. Now visit Flydumps.com to get free pdf study guide with valid Cisco 642-661 exam dumps and free vce dumps, which will help you passing quickly!
Exam A
QUESTION 1
What is the range of values from which an ISP can assign a private AS number?
A. 32768 to 65535
B. 64512 to 65535
C. 65101 to 65535
D. 65001 to 65535
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
Explanation: An autonomous system (AS) is a collection of networks under a single technical administration. Some other definitions refer to a collection of routers or IP prefixes, but in the end they all mean the same entity. The important principle is the technical administration, which means sharing the same routing protocol and routing policy. Legal and administrative ownership of the routers does not matter in terms of autonomous systems. Autonomous systems are identified by AS numbers, 16-bit unsigned quantities ranging from 1 to 65535. Public AS numbers are assigned by Internet registries. For customers that need AS numbers to run BGP in their private networks, a range of private AS numbers (64512 – 65535) has been reserved. Reference: Configuring BGP on Cisco Routers volume 1 p.2-4
QUESTION 2
Network topology exhibit
What can prevent the corresponding BGP session from being successfully established?
A. Certkiller 2 and Certkiller 5 cannot establish the IBGP session because Certkiller 2 and Certkiller 5 are not directly connected.
B. Certkiller 1 and Certkiller 2 establish the EBGP session if the BGP holddown timers between the two EBGP neighbors are different.
C. Certkiller 2 and Certkiller 5 cannot establish the IBGP session using the loopback0 interface if the EBGP-multihop value is set to the default value.
D. Certkiller 1 and Certkiller 2 cannot establish the EBGP session using the loopback0 interface if the EBGP-multihop value is set to the default value.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 3
Exhibit:
How should the EBGP session between R1 and R2 be established to enable load balancing? (Choose three)
A. Use the maximum-paths2 option.
» Read more about: Studying The Latest Version Cisco 642-661 Braindumps To Pass Exam Easily »
