In the IT industry, 350-501 SPCOR has become a popular Cisco exam. As a Cisco industry person, you know that winning the 350-501 SPCOR exam is all about getting it all.
The 350-501 SPCOR exam is a very challenging exam. So let’s take this opportunity to learn more about the 350-501 SPCOR exam.
An introduction to Cisco 350-501 SPCOR
350-501 SPCOR: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)
Focuses on your knowledge of service provider infrastructure including core architecture, services, networking, Automation, Quality of services, Security, and Network assurance.
How to get Cisco 350-501 SPCOR certification?
To successfully earn Cisco CCNP certification with Cisco 350-501 SPCOR, head to the 350-501 SPCOR study guide, then purchase a 350-501 SPCOR dumps and take the 350-501 SPCOR practice test.
Get 350-501 SPCOR study guide https://www.pass4itsure.com/350-501.html (350-501 SPCOR dumps 2022)
Why should I get Cisco CCNP 350-501 SPCOR certification?
If you’ve ever earned other Cisco certifications, you already know what makes it such a popular presence.
So why cisco CCNP 350-501 SPCOR certification? This technology cannot be mastered without Cisco CCNP 350-501 SPCOR certification. The Cisco CCNP 350-501 SPCOR is an exam certification that fundamentally sets itself apart from its competitors, and it is absolutely essential to earn it.
Tips to succeed with Cisco CCNP 350-501 SPCOR study guide
Well, guys. Earlier, I have said the basics of the 350-501 exam and answered common questions. Finally, let the exam skills come to an end and make your 350-501 SPCOR exam successful.
Suffice it to say that it is important to find the right 350-501 SPCOR study guide. Accurate 350-501 SPCOR exam dump resources will give you a win in your exam. Pass4itSure can be trusted with years of experience providing exam resources. You can try.
Next, share some free Cisco CCNP 350-501 SPCOR exam questions
These are just a few of the many questions on the 350-501 practice test to make your 350-501 exam as successful as possible.
Cisco CCNP 350-501 online test
QUESTION 1
What is the function of the FEC field within the OTN signal structure?
A. It allows the sending devices to apply QoS within the OTN forwarding structure.
B. It allows deep inspection of data payload fields.
C. It allows receivers to correct errors upon data arrival
D. It allows source nodes to discard payload errors before transmitting data on the network.
Correct Answer: C
QUESTION 2
DRAG-DROP
Drag and drop the message types from the left onto the target field of the message originator on the right.
Select and Place:
Correct Answer:
QUESTION 3
Refer to the exhibit. After implementing a new design for the network, a technician reviews the picture’s CLI output as
part of the MOP. Which two elements describe what the technician can ascertain from the ImpNull output? (Choose
two.)
A. Ultimate Hop Popping is in use for the prefix displayed.
B. Penultimate Hop Popping is in use for the prefix displayed.
C. Label 0 is used for the prefix displayed, but will not be part of the MPLS label stack for packets destined for
192.168.10.10.
D. Label 3 is in use for the prefix displayed and will be part of the MPLS label stack for packets destined for
192.168.10.10.
E. Label 0 is used for the prefix displayed and will be part of the MPLS label stack for packets destined for
192.168.10.10.
Correct Answer: BC
Implicit null is by default which means the penultimate router should only send IP packet thus it pops the label (popping the label known as PHP and this is done to reduce the load on the last-hop router)
References: https://community.cisco.com/t5/mpls/implicit-null-and-explicit-null/td-p/1496792
https://networkzblogger.com/2017/03/21/mpls-explicit-and-implicit-null-label/
QUESTION 4
DRAG-DROP
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right.
Select and Place:
Correct Answer:
Path Computation Element (Calculates paths through the network, keeps TE topology database information, sends path status updates)
Path computation Client (sends path calculation request, sends path creation request)
Path Computation Element (PCE)
Represents a software module (which can be a component or application) that enables the router to compute paths
applying a set of constraints between any pair of nodes within the router\\’s TE topology database. PCEs are
discovered through IGP.
Path Computation Client (PCC)
Represents a software module running on a router that is capable of sending and receiving path computation requests
and responses to and from PCEs. The PCC is typically an LSR (Label Switching Router).
QUESTION 5
Refer to the exhibit. An engineer is trying to implement a BGP configuration on a router. Which configuration error
prevents the ASBR from establishing a BGP neighborship to a directly connected BGP speaker?
A. The routing policy is absent for this Cisco IOS XR BGP instance.
B. The TCP session parameters are not specified.
C. The VPNv4 address family interferes with the BGP IPv4 address family negotiations.
D. The IPv4 address family configuration under neighbor configuration-mode must be removed.
Correct Answer: A
QUESTION 6
A service provider has a requirement to deliver WAN gateway functionality to multi-tenant, provider-hosted clouds.
Which Cisco platform meets this requirement?
A. Cisco ASR 9000 series
B. Cisco NX-OS
C. Cisco ASR 1000 Series
D. Cisco CSR 1000v
E. Cisco CRS series
Correct Answer: D
QUESTION 7
Refer to the exhibit. Which statement describes this configuration?
A. Router 1 has a new data store to collect SNMP information, but configuration must still be done at the CLI only.
B. Router 1 can be remotely managed by the CLI using Telnet.
C. Router 1 has its running configuration locked so changes can be made only when the administrator issues a kill
session.
D. Router 1 has a temporary data store where a copy of the running configuration can be manipulated and verified
before committing the configuration.
Correct Answer: D
QUESTION 8
A service provider is using multicast flows to provide streaming video content to its customers. Video streams are
sometimes interrupted, and network instability is determined to be the cause. Which action should the service provider
take to decrease the burden on the router resources in an unstable unicast routing environment?
A. increase the PIM hello hold timers
B. reduce the volume of query messages
C. filter unnecessary SA messages
D. tune the RPF backoff
Correct Answer: D
QUESTION 9
Which module refers to the network automation using Ansible?
A. the iosxr_system module to collect facts from remote devices
B. the iosxr_user module to manage banners for users in the local database
C. the losxr_logging module to run debugging for seventy levels 2 to 5
D. the iosxr_command module to issue run commands on remote devices
Correct Answer: D
QUESTION 10
A network engineer is configuring Flexible NetFlow and enters these commands
What are two results of implementing this feature instead of traditional NetFlow? (Choose two.)
A. CPU and memory utilization are reduced.
B. Only the flows of the top 100 talkers are exported.
C. The data export flow is more secure
D. The number of packets to be analyzed is reduced.
E. The accuracy of the data to be analyzed is improved.
Correct Answer: AD
QUESTION 11
Refer to the exhibit.
R1# show IP OSPF interface gig 2
GigabitEthernet2 is up, line protocol is upInternet Address 172.20.1.12/31, Area 0.0.1.255, Attached via Interface
enableProcess ID 1, Router ID 10.255.255.1, Network Type Point_to_point, cost:1
Topology-MTID : 0Cost : 1 Dsiabled : No Shutdown : No Topology Name : BaseEnabled by interface config, including
secondary ip addressesTransmit delay is 1 sec, state point_to_pointTimer intervals configured, Hello 10, Dead 40, wait
40, Retransmit 5
R1# show ip interface gig 2
GigabitEthernet2 is up, line protocol is internet Address 172.20.1.12/31MTU is 9216 bytes
R2# show IP OSPF interface gig 2
GigabitEthernet2 is up, line protocol is internet Address 172.20.1.13/31, Area 511, Attached via Interface
enable process ID 1, Router ID 10.255.255.2, Network Type Point_to_multipoint, cost:1
Topology-MTID: 0Cost: 1 Disabled: No Shutdown: No Topology Name: BaseEnabled by interface config, including
secondary IP addressesTransmit delay is 1 sec, state point_to_multipointTimer intervals configured, Hello 10, Dead 40,
wait for 40, Retransmit 5
R2# show IP interface gig 2
GigabitEthernet2 is up, line protocol is up Internet Address 172.20.1.13/31MTU is 1500 bytes
While troubleshooting the OSPF adjacency between routers R1 and R2 an engineer noticed that both routers are stuck
in the EXCHANGE/EXSTART state. What should the engineer fix to solve the ongoing issue?
A. match IPv4 addresses
B. match OSPF areas
C. match OSPF network types
D. match MTU values
Correct Answer: D
QUESTION 12
Which two actions describe ISP delegation to PCE servers? (Choose two)
A. adding a new PCE server with lower precedence than the primary PCE
B. changing the precedence of any of the PCE servers
C. removing TE re-optimization timer timeouts
D. entering the mpls traffic-eng reoptimize command
E. adding a new PCE server with higher precedence than the primary PCE
Correct Answer: AE
Ps. 350-501 SPCOR online pdf free
google drive: https://drive.google.com/file/d/1V2oG6M47C8Yoi9gPLZ12e8xGUCCy-i8M/view?usp=sharing
Genuine 350-501 SPCOR study guide https://www.pass4itsure.com/350-501.html ( 350-501 SPCOR pdf + 350-501 SPCOR vce)
It works — it really, really works. That’s why you should use the 350-501 SPCOR study guide to pass your upcoming Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) exam.
Now that you know how to win at the 350-501 SPCOR, it’s time to step out of your comfort zone. Run with unusual thoughts. Try things that others haven’t done.
Come on!
