What is the procedure to get a Cisco CCNP Wireless certification (300-360)? The Designing Cisco Wireless Enterprise Networks (300-360 WIDESIGN) exam is a 90 Minutes (60 – 70 questions) assessment in pass4itsure that is associated with the CCNP Wireless certification. The advantages of up to date Cisco 300-360 dumps WIDESIGN exam questions studying with Youtube online means. “Designing Cisco Wireless Enterprise Networks” is the exam name of Pass4itsure Cisco 300-360 dumps test which designed to help candidates prepare for and pass the Cisco 300-360 exam.
In this way Cisco Designing Cisco Wireless Enterprise Networks (WIDESIGN) recent changes can be understood.Cost effective online preparatory Designing Cisco Wireless Enterprise Networks (WIDESIGN) are offered to the https://www.pass4itsure.com/300-360.html dumps candidates for an instant yet comprehensive Cisco Designing Cisco Wireless Enterprise Networks (WIDESIGN) preparation.
[100% Pass Pass4itsure 300-360 Dumps Version From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWRzV4WUQyeVN2N2c
[100% Pass Pass4itsure 300-370 Dumps Version From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWVVhaZUpnZWRvOHM
Pass4itsure Latest and Most Accurate Cisco 300-360 Dumps Dumps Exam Q&As:
QUESTION 34
What are two advantages of conducting an active survey versus a passive survey when verifying RF coverage? (Choose two.)
A. verifies packet loss
B. verifies roaming
C. verifies SNR
D. verifies signal level
E. verifies interferers
300-360 exam Correct Answer: AB
QUESTION 35
An engineer is deploying an outdoor Mesh network. Which four major factors should be considered? (Choose four.)
A. power
B. buildings
C. traffic lights
D. satellite dishes
E. line of sight
F. network connectivity
G. power lines
H. mounting
Correct Answer: AEHF
QUESTION 36
A customer has deployed an N+N redundant wireless infrastructure. In this deployment the access points have been salt and peppered between controllers. What configuration would be necessary to cut down on the use of mobility tunnels for voice clients?
A. mobility anchor
B. KIS based CAC
C. media session snooping
D. re-anchor roamed voice clients
300-360 dumps Correct Answer: D
QUESTION 37
Before upgrading Secure Platform, you should create a backup. To save time, many administrators use the command backup. This creates a backup of the Check Point configuration as well as the system configuration. An administrator has installed the latest HFA on the system for fixing traffic problems after creating a backup file. There is a mistake in the very complex static routing configuration. The Check Point configuration has not been changed. Can the administrator use a restore to fix the errors in static routing?
A. The restore is not possible because the backup file does not have the same build number (version).
B. The restore is done by selecting Snapshot Management from the Secure Platform boot menu.
C. The restore can be done easily by the command restore and selecting the appropriate backup file.
D. A back up cannot be restored, because the binary files are missing.
Correct Answer: C
QUESTION 38
You intend to upgrade a Check Point Gateway from R65 to R76. To avoid problems, you decide to back up the Gateway. Which approach allows the Gateway configuration to be completely backed up into a manageable size in the least amount of time?
A. snapshot
B. database revision
C. backup
D. upgrade export
300-360 pdf Correct Answer: D
QUESTION 39
Your R76 enterprise Security Management Server is running abnormally on Windows 2008 Server. You decide to try reinstalling the Security Management Server, but you want to try keeping the critical Security Management Server configuration settings intact (i.e., all Security Policies, databases, SIC, licensing etc.) What is the BEST method to reinstall the Server and keep its critical configuration?
A. 1. Create a database revision control backup using the Smart Dashboard
2. Create a compressed archive of the *FWDlR*\ conf and »FWDiR8\lib directories and copy them to another networked machine.
3. Uninstall all R70 packages via Add/Remove Programs and reboot.
4. Install again as a primary Security Management Server using the R70 CD.
5. Reboot and restore the two archived directories over the top of the new installation, choosing to overwrite existing files.
B. 1. Download the latest upgrade export utility and run it from a c; \temp directory to export the configuration into a .tgz file
2. Skip any upgarde__verification warnings since you are not upgrading
3. Transfer the .tgz file to another networked machine
4. Download and run the cpclean utility and reboot
5. Use the R70 CD-ROM to select the uuarade import ootion to import the configuration
C. 1. Download the latest upqrade_expoct utility and run it from a \temp directory to export the configuration into a .tgz file
2. Perform any requested upgcade_veriЈic«tion suggested steps
3. Uninstall all R70 packages via Add/Remove Programs and reboot
4. Use Smart Update to reinstall the Security Management Server and reboot
5. Transfer the tgz file back to the local \temp
6. Run upgrade__import to import the configuration
D. 1. Insert the F70 CD-ROM, and select the option to export the configuration using the latest upgrade utilities
2. Perform any requested upgrade verification suggested steps and re-export the configuration if needed
3. Save the export ” tgz file to a local c: \temp directory
4. Uninstall all R70 packages via Add/Remove Programs and reboot
5. Install again using the R70 CD-ROM as a primary Security Management Server and reboot
6. Run upgrade import to import the configuration
Correct Answer: C
QUESTION 40
True or false? After creating a snapshot of a Windows 2003 SP2 Security Management Server, you can restore it on a Secure Platform R76 Security Management Server, except you must load interface information manually.
A. True, but only when the snapshot file is restored to a Secure Platform system running R76.20.
B. False, you cannot run the Check Point snapshot utility on a Windows gateway.
C. True, but only when the snapshot file is restored to a Secure Platform system running R76.10.
D. False, all configuration information conveys to the new system, including the interface configuration settings.
300-360 vce Correct Answer: B
QUESTION 41
Check Point recommends that you back up systems running Check Point products. Run your back ups during maintenance windows to limit disruptions to services, improve CPU usage, and simplify time allotment. Which back up method does Check Point recommend before major changes, such as upgrades?
A. snapshot
B. upgrade export
C. backup
D. migrate export
Correct Answer: A
QUESTION 42
Check Point recommends that you back up systems running Check Point products. Run your back ups during maintenance windows to limit disruptions to services, improve CPU usage, and simplify time allotment. Which back up method does Check Point recommend every couple of months, depending on how frequently you make changes to the network or policy?
A. backup
B. migrate export
C. upgrade export
D. snapshot
300-360 exam Correct Answer: A
QUESTION 43
Check Point recommends that you back up systems running Check Point products. Run your back ups during maintenance windows to limit disruptions to services, improve CPU usage, and simplify time allotment. Which back up method does Check Point recommend anytime outside a maintenance window?
A. backup
B. migrate export
C. backup export
D. snapshot
Correct Answer: B
QUESTION 44
Snapshot is available on which Security Management Server and Security Gateway platforms?
A. Solaris
B. Windows 2003 Server
C. Windows XP Server
D. Secure Platform
300-360 dumps Correct Answer: D
QUESTION 45
The file snapshot generates is very large, and can only be restored to:
A. The device that created it, after it has been upgraded
B. Individual members of a cluster configuration
C. Windows Server class systems
D. A device having exactly the same Operating System as the device that created the file
Correct Answer: D
QUESTION 46
Restoring a snapshot-created file on one machine that was created on another requires which of the following to be the same on both machines?
A. Windows version, objects database, patch level, and interface configuration
B. Windows version, interface configuration, and patch level
C. State, Secure Platform version, and patch level
D. State, Secure Platform version, and objects database
300-360 pdf Correct Answer: C
QUESTION 47
When restoring a Security Management Server from a backup file, the restore package can be retrieved from which source?
A. HTTP server, FTP server, or TFTP server
B. Disk, SCP server, or TFTP server
C. Local folder, TFTP server, or FTP server
D. Local folder, TFTP server, or Disk
Correct Answer: C
QUESTION 48
When upgrading Check Point products in a distributed environment, in which order should you upgrade these components?
1 GUI Client
2 Security Management Server
3 Security Gateway
A. 3, 2, 1
B. 1, 2, 3
C. 3, 1, 2
D. 2, 3, 1
300-360 vce Correct Answer: D
QUESTION 49
When using migrate to upgrade a Secure Management Server, which of the following is included in the migration?
A. Smart Event database
B. Smart Reporter database
C. classes. C file
D. System interface configuration
Correct Answer: C
QUESTION 50
Typically, when you upgrade the Security Management Server, you install and configure a fresh R76 installation on a new computer and then migrate the database from the original machine. When doing this, what is required of the two machines? They must both have the same:
A. Products installed.
B. Interfaces configured.
C. State.
D. Patch level.
300-360 exam Correct Answer: A
QUESTION 51
Typically, when you upgrade the Security Management Server, you install and configure a fresh R76 installation on a new computer and then migrate the database from the original machine. Which of the following statements are TRUE?
A. Both machines must have the same number of interfaces installed and configured before migration can be attempted.
B. The new machine may not have more Check Point products installed than the original Security Management Server.
C. All product databases are included in the migration.
D. The Security Management Server on the new machine must be the same or greater than the version on the original machine.
Correct Answer: D
QUESTION 52
Typically, when you upgrade the Security Management Server, you install and configure a fresh R76 installation on a new computer and then migrate the database from the original machine. What is the correct order of the steps below to successfully complete this procedure?
1) Export databases from source.
2) Connect target to network.
3) Prepare the source machine for export.
4) Import databases to target.
5) Install new version on target.
6) Test target deployment.
A. 6, 5, 3, 1, 4, 2
B. 3, 1, 5, 4, 2, 6
C. 5, 2, 6, 3, 1, 4
D. 3, 5, 1, 4, 6, 2
300-360 dumps Correct Answer: D
QUESTION 53
During a Security Management Server migrate export, the system:
A. Creates a backup file that includes the Smart Event database.
B. Creates a backup file that includes the Smart Reporter database.
C. Creates a backup archive for all the Check Point configuration settings.
D. Saves all system settings and Check Point product configuration settings to a file.
Correct Answer: C
QUESTION 54
If no flags are defined during a back up on the Security Management Server, where does the system store the *.tgz file?
A. /var/opt/backups
B. /var/backups
C. /var/CPbackup/backups
D. /var/tmp/backups
300-360 pdf Correct Answer: C
QUESTION 55
Which is NOT a valid option when upgrading Cluster Deployments?
A. Full Connectivity Upgrade
B. Fast path Upgrade
C. Minimal Effort Upgrade
D. Zero Downtime
Correct Answer: B
QUESTION 56
In a zero downtime firewall cluster environment what command do you run to avoid switching problems around the cluster.
A. cphaconf set mc_relod
B. cphaconf set clear_subs
C. cphaconf set_ccp broadcast
D. cphaconf set_ccp multicast
300-360 vce Correct Answer: C
QUESTION 57
In a “zero downtime” scenario, which command do you run manually after all cluster members are upgraded?
A. cphaconf set_ccp broadcast
B. cphaconf set clear_subs
C. cphaconf set mc_relod
D. cphaconf set_ccp multicast
Correct Answer: D
QUESTION 58
Which command provides cluster upgrade status?
A. cphaprob status
B. cphaprob ldstat
C. cphaprob fcustat
D. cphaprob tablestat
300-360 exam Correct Answer: C
QUESTION 59
John is upgrading a cluster from NGX R65 to R76. John knows that you can verify the upgrade process using the pre-upgrade verifier tool. When John is running Pre-Upgrade Verification, he sees the warning message:
Title: Incompatible pattern.
What is happening?
A. R76 uses a new pattern matching engine. Incompatible patterns should be deleted before upgrade process to complete it successfully.
B. Pre-Upgrade Verification process detected a problem with actual configuration and upgrade will be aborted.
C. Pre-Upgrade Verification tool only shows that message but it is only informational.
D. The actual configuration contains user defined patterns in IPS that are not supported in R76. If the patterns are not fixed after upgrade, they will not be used with R76 Security Gateways.
Correct Answer: D
QUESTION 60
Which command would you use to save the interface information before upgrading a GAiA Gateway?
A. netstat rn > [filename].txt
B. ipconfig a > [filename].txt
C. ifconfig > [filename].txt
D. cp /etc/sysconfig/network.C [location]
300-360 dumps Correct Answer: C
Cisco 300–360 dumps candidates can easily get the free updates as most of the professional companies provide free updates for a particular period of time. “Designing Cisco Wireless Enterprise Networks”, also known as 300-360 exam, is a Cisco certification which covers all the knowledge points of the real Cisco exam. Pass4itsure Cisco 300-360 dumps exam questions answers are updated (60 Q&As) are verified by experts. The associated certifications of https://www.pass4itsure.com/300-360.html dumps is CCNP Wireless.
