Everything you need to know about the 300-630 exam (number of 300-630 questions, time to complete the test, practice tests, books, study materials, exam questions, syllabus, etc.) will be presented here, and you will be taught how to prepare to crack the Cisco 300-630 DCACIA exam.
- Summary of Cisco 300-630 DCACIA Exam Information
- Relationship of the CCNP Data Center Certification to the 300-630 DCACIA Exam
- How to Effectively Prepare for the Cisco 300-630 DCACIA Exam (300-630 Exam Guide)
- Take Pass4itSure offers the most reliable and up-to-date 300-630 DCACIA practice test practice questions (free of charge)
- Where is the way out to pass the 300-630 DCACIA exam
Summary of Cisco 300-630 DCACIA exam information
| Exam purpose: | Test candidates for advanced knowledge and skills of Cisco switches in ACI mode, including configuration, management, implementation, and troubleshooting. |
| Exam format: | On-site or online. |
| Duration: | 90 minutes |
| Price: | $300 |
| Several exam questions: | 55-65 |
| DCACIA exam topic percentage: | ACI Packet Forwarding 20%， Advanced ACI Policies and Integrations 25%， Multipod 20%， Multisite 20%， Traditional network with ACI 15%。 |
| Certification: | CCNP Data Center Certification, but there is a prerequisite that you must first pass Core Exam 350-601 DCCOR v1.1. It is also associated with the Cisco Certified Professional – ACI Advanced Implementation Certification. |
| Language: | English |
Relationship of the CCNP Data Center certification to the 300-630 DCACIA exam
Society is evolving rapidly, and technology is advancing at the speed of light. The Internet of Things (IoT), big data, cloud computing, and artificial intelligence are emerging technologies that are gaining traction, and at the heart of everything is the data center, which is one of the technologies enterprises are currently using to complete various data operations.
So, how do you get CCNP Data Center Certified?
To earn the CCNP Data Center certification, you need to pass two exams: one that includes the core exam 350-601 DCCOR v1.1 (implementing Cisco Data Center Core Technologies) followed by a data center concentration exam of your choice (300-610 DCID v1.1, 300-615 DCIT v1.1, 300-620 DCACI v1.1, 300-630 DCACIA v1.0, 300-635 DCAUTO v1.1). To get back to the point, this article focuses on the 300-630 DCACIA. You will first pass the 350-601 DCCOR exam and then the 300-630 DCACIA exam.
How to effectively prepare for the Cisco 300-630 DCACIA exam (300-630 Exam Guide)
1. Divide the time to prepare
According to your own preparation time, make a study plan of 300-630 DCACIA exam time and strictly implement it.
2. Learn from a variety of sources
There are many types of 300-630 exam study materials (videos, study guides, books, online exercises, etc.) available on the market, both official and third-party, so don’t limit yourself to just one, try three or four resources to ensure you are well prepared for the exam.
3. Practice with the latest Cisco 300-630 DCACIA mock tests
With any exam, practice is the most important. Strengthen practice and check for gaps. In addition, taking the Cisco 300-630 DCACIA practice test can increase your confidence in passing the exam.
4. Collation of wrong questions
It is necessary to make a collection of wrong questions, sort out the questions you have made wrong, and read them often to ensure that you will not make mistakes in the real exam.
Take Pass4itSure offers the most reliable and up-to-date 300-630 DCACIA practice test practice questions (free of charge)
Question 1:
Refer to the exhibit. A customer implements Cisco ACI Multi-Site with default MTU settings between two sites. Which configuration should be applied on the interface Eth1/10 on the ISN-1 device?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: A
Question 2:
What two actions should be taken to deploy a new Cisco ACI Multi-Pod setup? (Choose two.)
A. Configure anycast RP for the underlying multicast protocol
B. Configure the TEP pool of the new pod to be routable across the IPN
C. Configure MP-BGP on IPN routers that face the Cisco ACI spines
D. Increase interface MTU for all IPN routers to support VXLAN traffic
E. Connect all spines to the IPN
Correct Answer: DE
Question 3:
Which two components must be configured as stretched to establish intra-VRF communication between two EPGs that are deployed in different sites and different bridge domains? (Choose two.)
A. contract
B. tenant
C. application profile
D. bridge domain
E. EPG
Correct Answer: DE
Question 4:
In a Cisco ACI Multi-Site fabric, the Inter-Site BUM Traffic Allow option is enabled in a specific stretched bridge domain. What is used to forward BUM traffic to all endpoints in the same broadcast domain?
A. ingress replication on the spines in the source site
B. egress replication on the source leaf switches
C. egress replication on the destination leaf switches
D. ingress replication on the spines in the destination site
Correct Answer: D
Reference: http://yves-louis.com/DCI/?p=1277
Question 5:
Refer to the exhibit. How are the STP BPDUs forwarded over Cisco ACI fabric?
A. STP BPDUs that are generated by Switch2 are received by Switch1 and Switch3.
B. Cisco ACI fabric drops all STP BPDUs that are generated by the external switches.
C. Cisco ACI acts as the STP root for all three external switches.
D. STP BPDUs that are generated by Switch1 are received only by Switch3.
Correct Answer: A
Reference: https://www.linkedin.com/pulse/cisco-aci-network-behaviour-stptcn-how-identify-loop-ankit-kulshresta
Question 6:
Which approach does Cisco ACI use to achieve multidestination packet forwarding between leaf switches in the same fabric?
A. Map VXLAN VTEP to the multicast group
B. Map VXLAN to PIM-SM protocol
C. Map VXLAN VNI to the multicast group
D. Map VXLAN to PIM-DM protocol
Correct Answer: C
Question 7:
Which action must be taken to connect two consilient servers in active/standby mode to two ACI leaves?
A. Implement a virtual PortChannel on ACI leaves
B. Enable ARP flooding for the bridge domain if the MAC address of the active interface changes after NIC failover
C. Configure ARP flooding for the bridge domain if the MAC address of the active interface stays identical after a NIC failover
D. Disable data plane learning to avoid endpoint flapping
Correct Answer: C
Question 8:
An engineer must allow routes learned from one L3Out to be advertised out another L3Out. The engineer does not have an explicit list of all the routes that must be advertised, however, they know that they are all part of the 10.16.0.0/16 CIDR block. Which attributes must be selected under Ext-EPG to allow the necessary routes to be advertised?
A. Enable Export Route Control Subnet and enable Aggregate Export
B. Disable Shared Route Control Subnet and enable Aggregate Shared Routes
C. Enable Export Route Control Subnet and disable Aggregate Shared Routes
D. Enable Export Route Control Subnet and enable Shared Route Control Subnet
Correct Answer: A
Question 9:
An engineer must limit local and remote endpoint learning to the bridge domain subnet. Which action should be taken inside the Cisco APIC?
A. Disable Remote EP Learn
B. Enable Enforce Subnet Check
C. Disable Endpoint Dataplane Learning
D. Enable Limit IP Learning to Subnet
Correct Answer: B
Question 10:
How does Cisco ACI manage the STP BPDUs between two pods?
A. Cisco ACI spines perform ingress replication for STP BPDUs
B. Cisco ACI spines suppress STP BPDUs to be forwarded to other pods
C. BPDUs are forwarded over IPN using the bridge domain GIPo multicast address
D. Special multicast group 239.255.255.255 is used to forward STP BPDUs
Correct Answer: C
Question 11:
What are two characteristics of Cisco ACI’s interaction with MSTP? (Choose two.)
A. A Cisco ACI leaf flushes all local endpoints in the received EPG when an MSTP TCN frame is received.
B. A static path binding is required for native VLAN to carry the MST BPDUs in existing EPGs.
C. Mis-cabling protocol is used to snoop the MSTP TCN packets.
D. A dedicated EPG must be created for the native VLAN ID with static bindings toward the MSTP-enabled switches.
E. The PVST simulation must be configured on external network switches to support MSTP.
Correct Answer: CD
Question 12:
Which two actions are the Cisco best practices to configure NIC teaming load balancing for Cisco UCS B-Series blades that are connected to the Cisco ACI leaf switches? (Choose two.)
A. Create vPC+
B. Enable LACP active mode
C. Create PAgP
D. Create vPC
E. Enable MAC pinning
Correct Answer: BE
Question 13:
What is the purpose of the Forwarding Tag (FTAG) in Cisco ACI?
A. FTAG is used in Cisco ACI to add a label to the iVXLAN traffic in the fabric to apply the correct policy.
B. FTAG is used in Cisco ACI to add a label to the VXLAN traffic in the fabric to apply the correct policy.
C. FTAG trees in Cisco ACI are used to load balance unicast traffic.
D. FTAG trees in Cisco ACI are used to load balance multi-destination traffic.
Correct Answer: D
Question 14:
Which firewall connection allows for the integration of service nodes in transparent mode with a Cisco ACI Multi-Pod setup?
A. active-standby mode across pods
B. active-active mode per pod for communication between internal endpoints
C. active-standby mode per pod for communication between endpoints and external networks
D. active-active mode across pods
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739571.html (table 1)
Question 15:
As part of a newly deployed ACI fabric, a pair of border leaf switches have been deployed to provide shared services for all tenants. The configured L3Out runs OSPF as the routing protocol. The requirement is to advertise the routes from the border leaf switches to the compute leaf switches. Which configuration must be implemented to meet these requirements?
A. Configure a BGP route reflector policy for the Cisco ACI pod
B. Define the shared L3Out in the common tenant
C. Enable Import Route Control Enforcement in the L3Out policy
D. Define the consumer subnet under the consumer EPG
Correct Answer: A
Related More Cisco CCNP Certification Exam Questions…
After passing the 300-630 DCACIA exam
Passing the Data Center 300-630 DCACIA exam is essential for developing your skills and career advancement.
When you successfully pass the Cisco 300-630 exam, you’ll earn your CCNP data center certification and qualify for senior positions that support digital business transformation initiatives.
There are 1,630 vacancies for Senior Director of Digital Transformation on Indeed.com.
There are 2,739 senior digital transformation manager jobs in the US on Glassdoor.
Director of Digital Transformation in Arizona, Arizona, in 56 companies with open positions (hiring) on ZipRecruiter.
This information shows that there is a shortage of such talents in the market, and if you have these skills, you can work without worry.
Summary:
By following this guide, the 300-630 DCACIA exam will be easy to pass. Remember, by using the Pass4itSure 300-630 DCACIA practice test https://www.pass4itsure.com/300-630.html as your practice test resource, you’ll earn the best CCNP data center certification, and you’ll also get an enviable career.
