Valid Cisco 300-410 questions shared by Pass4itsure for helping to pass the Cisco 300-410 exam! Get the newest Pass4itsure Cisco 300-410 exam dumps with VCE and PDF here: https://www.pass4itsure.com/300-410.html (195 Q&As Dumps).
[Free PDF] Cisco 300-410 pdf Q&As https://drive.google.com/file/d/1sldKrI7eQwImDX3DQHO_MosA_aL0iQnV/view?usp=sharing
Suitable for 300-410 complete Cisco learning pathway
The content is rich and diverse, and learning will not become boring. You can learn in multiple ways through the Cisco 300-410 exam.
Cisco 300-410 Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)
- Download
- Answer practice questions, the actual Cisco 300-410 test
Free Cisco 300-410 dumps download
[PDF] Free Cisco 300-410 dumps pdf download https://drive.google.com/file/d/1sldKrI7eQwImDX3DQHO_MosA_aL0iQnV/view?usp=sharing
Pass4itsure offers the latest Cisco 300-410 practice test free of charge 1-13
QUESTION 1
Refer to the exhibit. A network engineer executes the show ipv6 ospf database command and is presented with the
output that is shown. Which flooding scope is referenced in the link-state type?
A. link-local
B. area
C. As (OSPF domain)
D. reserved
Correct Answer: B
QUESTION 2
Refer to the exhibits. All the serial links between R1, R2, and R3 have the same bandwidth. Users on the
192.168.1.0/24 networks report slow response times while they access resources on network 192.168.3.0/24. When a
traceroute is run on the path, it shows that the packet is getting forwarded via R2 to R3 although the link between R1
and R3 is still up.
What must the network administrator do to fix the slowness?
A. Add a static route on R1 using the next hop of R3.
B. Remove the static route on R1.
C. Change the Administrative Distance of EIGRP to 5.
D. Redistribute the R1 static route to EIGRP.
Correct Answer: B
Exam B
QUESTION 3
DRAG DROP
Drag and drop the MPLS terms from the left onto the correct definitions on the right.
Select and Place:
Correct Answer:
QUESTION 4
Refer to the exhibit.
The administrator can see the traps for the failed login attempts, but cannot see the traps of successful login attempts.
What command is needed to resolve the issue?
A. Configure logging history 2
B. Configure logging history 3
C. Configure logging history 4
D. Configure logging history 5
Correct Answer: D
By default, the maximum severity sent as a Syslog trap is a warning. That is why you see Syslog traps for login failures.
Since a login success is severity 5 (notifications), those Syslog messages will not be converted to traps. To fix this,
configure:
Note:
The syntax of the login block is:
login block-for seconds attempts tries within seconds
QUESTION 5
Refer to the exhibits. Phase-3 tunnels cannot be established between spoke-to-spoke in DMVPN. Which two commands
are missing? (Choose two.)
A. The ip nhrp redirect command is missing on the spoke routers.
B. The ip nhrp shortcut command is missing on the spoke routers.
C. The ip nhrp redirect command is missing on the hub router.
D. The ip nhrp shortcut command is missing on the hub router.
E. The ip nhrp map command is missing on the hub router.
Correct Answer: BC
QUESTION 6
Refer to the exhibits.
When DMVPN is configured, which configuration allows spoke-to-spoke communication using loopback as tunnel
source?
A. Configure crypto isakmp key cisco address 0.0.0.0 on the hub.
B. Configure crypto isakmp key Cisco address 200.1.0.0 255.255.0.0 on the hub.
C. Configure crypto isakmp key cisco address 200.1.0.0 255.255.0.0 on the spokes.
D. Configure crypto isakmp key cisco address 0.0.0.0 on the spokes.
Correct Answer: A
QUESTION 7
How are MPLS Layer 3 VPN services deployed?
A. The RD and RT values must match under the VRF.
B. The import and export RT values under a VRF must always be the same.
C. The label switch path must be available between the local and remote PE routers.
D. The RD and RT values under a VRF must match on the remote PE router.
Correct Answer: C
https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/vpn/65x/b-l3vpn-cg-ncs5500-65x/b-l3vpn-cgncs5500-65x_chapter_010.html
QUESTION 8
Refer to the exhibit. An IPv6 network was newly deployed in the environment and the help desk reports that R3 cannot
SSH to the R2s Loopback interface. Which action resolves the issue?
A. Modify line 10 of the access list to permit instead of deny.
B. Remove line 60 from the access list.
C. Modify line 30 of the access list to permit instead of deny.
D. Remove line 70 from the access list.
Correct Answer: C
QUESTION 9
Refer to the exhibit. An engineer is trying to configure local authentication on the console line, but the device is trying to
authenticate using TACACS+. Which action produces the desired configuration?
A. Add the aaa authentication login default none command to the global configuration.
B. Replace the capital “C” with a lowercase “c” in the aaa authentication login Console local command.
C. Add the aaa authentication login default group tacacs+ local-case command to the global configuration.
D. Add the login authentication Console command to the line configuration
Correct Answer: D
Reference: https://community.cisco.com/t5/switching/how-to-define-login-local-for-console-0/td-p/2949493
QUESTION 10
DRAG DROP Refer to the exhibit.
Drag and drop the credentials from the left onto the remote login information on the right to resolve a failed login attempt
to vtys. Not all credentials are used
Select and Place:
Correct Answer:
vty 0:
+
cisco
+
0csic
vty 1:
+
no username
+
no password
The command “aaa authentication login default none” means no authentication is required when access to the device
via Console/VTY/AUX so if one interface does not specify another login authentication method (via the “login
authentication …” command), it will allow to access without requiring username or password. In this case VTY 1 does
not specify another authentication login method so it will use the default method (which is “none” in this case).
QUESTION 11
Which protocol does VRF-Lite support?
A. S-IS
B. ODR
C. EIGRP
D. IGRP
Correct Answer: C
QUESTION 12
Refer to the exhibit. A network administrator is troubleshooting OSPF adjacency issue by going through the console
logs in the router, but due to an overwhelming log messages stream, it is impossible to capture the problem. Which two
commands reduce console log messages to relevant OSPF neighbor problem details so that the issue can be resolved?
(Choose two.)
A. debug condition ospf neighbor
B. debug condition interface
C. debug condition session-id ADJCHG
D. debug condition all
Correct Answer: AB
QUESTION 13
An engineer configured the wrong default gateway for the Cisco DNA Center enterprise interface during the install.
Which command must the engineer run to correct the configuration?
A. sudo maglev-config update
B. sudo maglev install config update
C. sudo maglev reinstall
D. sudo update config install
Correct Answer: A
Pass4itsure Cisco exam dumps discount code share
Summarize:
[Q1-Q13] Free Cisco 300-410 pdf download https://drive.google.com/file/d/1sldKrI7eQwImDX3DQHO_MosA_aL0iQnV/view?usp=sharing
Share all the resources: Latest Cisco 300-410 practice questions, latest Cisco 300-410 pdf dumps. The latest updated Cisco 300-410 dumps https://www.pass4itsure.com/300-410.html Study hard and practices a lot. This will help you prepare for the Cisco 300-410 exam. Good luck!
